• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:55来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (4)
 Make sure that the warning notices are in position to tell persons not to operate the hydraulic systems.

 (5)
 Make sure that the access platforms are in position at zones 311/312 and 330/340.


 4. Procedure
_________ Subtask 55-10-11-110-050
 A. Cleaning

 (1) Clean all connecting hardwear with CLEANING AGENTS (Material No. 11-002).

 

 Subtask 55-10-11-941-052

 B. Attach Support Equipment
R  (1) Put the CRANE with the SLING-THS (98D55109005000) in position and attach the cables to the hoisting lugs.
 (2) Operate the crane and slowly tighten the sling cables, adjust as necessary to get an equal tension on the cables.


 TASK 55-10-11-400-001

 

 Installation of the Trimmable Horizontal Stabilizer WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______
 MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR
 DAMAGE.

 WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______
 FALL CAN INJURE OR KILL YOU.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______
 CARBONFIBER REINFORCED PLASTIC.

 1.
 Reason for the Job

__________________
 Self Explanatory

 

 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific electrical blanking caps and plugs
 No specific hydraulic blanking caps
 No specific 35D55182822000
 98D27903500000 4 PIN-SIDE STICK LOCKING


R 98D55109005000 1 SLING-THS

 

 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 16-003  F ASNB70720
 COATING (OBSOLETE USE 16-021) (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-41-00-720-001  Functional Test of the THS-Actuator Overtravel
 Related to the Mechanical Indicator
 27-41-00-820-001 Adjustment of the THS Zero Position
 27-44-00-710-002 Operational Test of the Trimmable Horizontal

 Stabilizer Actuator with the Individual Hydraulic Systems 27-44-51-400-001 Installation of the Trimmable Horizontal Stabilizer
 (THS) Actuator (9CE) 29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System 49-11-11-400-001 Installation of the Auxiliary Power Unit (APU) -
4005KM (GTCP 36-300) R 49-11-11-400-003 Installation of the Power Plant (APU) (APS 3200) 53-53-11-400-001 Installation of the Horizontal Support Struts between STA3531/FR74 and STA3655/FR77 53-56-11-400-001 Installation of the Support Fittings of the Trimmable
 Horizontal Stabilizer (THS) 53-58-11-400-007 Installation of the Fuselage Tail Cone 55-15-11-400-001 Installation of the Apron 333AT/333AB/343AT/343AB 55-10-11-991-001 Fig. 401 55-10-11-991-002 Fig. 402 55-10-11-991-003 Fig. 403 55-10-11-991-004 Fig. 404
 3. Job Set-up
__________
 Subtask 55-10-11-860-051
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the hydraulic systems are depressurized (Ref. TASK 29-10-00-864-001), (Ref. TASK 29-10-00-864-002), (Ref. TASK 29-10-00-864-003).

 (2)
 Make sure that the PIN-SIDE STICK LOCKING is in position in the CAPT and F/O side stick controllers.

 (3)
 Make sure that the warning notices are in position in the flight compartment to tell persons not to operate the flight controls.

 (4)
 Make sure that the warning notices are in position to tell persons not to operate the hydraulic systems.


 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM STABILIZERS 安定面(14)