R TASK 28-11-00-600-008- 01
R Biocidal Shock Treatment for Moderate Contamination - With Fuel Mixed with
R Kathon Biocide
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______
R START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______
R GEAR.
R 1. Reason for the Job__________________
R Do this procedure not more than 10 days after a sample of fuel is taken and
R moderate contamination is found
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific safety barriers
R No specific warning notices
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 17-003A
R BIOCIDE FOR FUEL PRESERVATION (Ref. 20-31-00)
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 12-11-28-650-003 R 12-32-28-281-001 R 12-32-28-281-003 R R 24-41-00-861-002 R R 24-41-00-862-002 R R 28-00-00-910-001 R 28-11-00-600-008 R R 28-25-00-650-001 R 28-25-00-650-003 R R 31-60-00-860-001 R 31-60-00-860-002 R 32-00-00-481-001 R R 49-32-11-610-001 R 49-32-11-610-002 R 49-32-41-920-001 R 73-11-10-920-001
R 3. Job Set-up
__________
R Subtask 28-11-00-941-104
R A. Safety Precautions Pressure Refuel with Automatic Control Drain Water Content Sample Fuel for Microbiological Contamination Analysis Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Fuel Safety Procedures Biocidal Shock Treatment for Moderate Contamination -With Fuel Mixed with Biobor Biocide Pressure Defuel To Drain Remaining Fuel from the Wing Tanks and the Center Tank EIS Start Procedure EIS Stop Procedure Installation of the Safety Devices on the Landing Gears Servicing of the Fuel Filter (GTCP 36-300) Fuel Filter Element - Removal/Installation (APS 3200) Replacement of the Fuel Filter (8028KM) (131-9(A)) Remove, Inspect and Replace Fuel Filter Element
R WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
R NOTE : This procedure is applicable to MICROBIOLOGICAL CONTAMIN. PROTECT.
____ R MATERIALS (Material No. 17-003A) only. The material is Kathon. For R the equivalent procedure with the use of Biobor (Ref. TASK 28-11-R 00-600-008).
R (1) Put the safety barriers in position.
R (2) Make sure that the ground safety locks are installed on the landing R gear (Ref. TASK 32-00-00-481-001).
1EFF : ALL 1 28-11-00Page 314 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 315 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 316 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 317 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 318 1 1 May 01/05 1 1 1CES 1R C. Referenced Information
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油1(85)