R Fuel Tank Pre-Entry Checklist Figure 301/TASK 28-10-00-991-004
1EFF : 1 1 1CES ALL 1 111 28-10-00 Page 304 May 01/04
(7)
You must make sure that all the equipment you use in the fuel tank is clean. Do not let oil, dirt, grit, swarf or loose paint cause contamination of the tank.
(8)
Do not go in a tank until you know the location and dimensions of the work areas.
NOTE : In some of the outer wing areas you can only put part of your
____
body into the tank.
(9) Do not touch or push against the magnetic level indicators when you are in the fuel tank. This will prevent damage to them.
(10)
Do not cause damage to the internal structure, sealant, electrical cables or conduits during maintenance.
(11)
Use protective mats on the floor of the fuel tank to prevent:
-damage to the fuel tank structure
-injury to persons.
(12)
Use only the approved spark-proof lamps or spark-proof flashlights in the fuel tank. Sealed vapor-lamps are not to be used.
(13)
If possible, safety all components before you place them inside the fuel tank.
(14)
Use only an approved MISCELLANEOUS (Material No. 19-003) to dry the fuel tank internally.
NOTE : It is possible you will have to remove parts of the structure
____
(and equipment) to get access to parts of the tank.
(15) Make sure that all the bonding straps are in position and connected correctly. Make sure that they are not corroded, damaged or broken. If necessary, install new bonding straps (Ref. TASK 20-28-00-912-002), before you install the fuel-tank access panels.
1EFF : ALL 1 28-10-00Page 305 1 1 May 01/04R 1 1 1CES 1
TASK 28-10-00-910-002
Access to the Fuel Tanks and the Work Areas
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R R Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific air compressor
No specific air-supplied respirators
No specific combustible gas indicator
No specific non metallic container
No specific protective clothing
No specific protective mats
No specific safety barriers
No specific spark-proof flashlights
No specific spark-proof lamps
No specific warning notices
No specific adjustable access platform 3.5 m (11 ft. 6 in.)
98D57004013000 1 HOOK-COVER (RIB 2 SURGE DOORS)
98D57004014000 1 HOOK-COVER (RIB2-SURGE DOORS)
1EFF : ALL 1 28-10-00Page 306 1 1 May 01/04 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
Material No. 19-018 USA AMS 5687
LOCKWIRE 0.6 MM (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油1(75)