(4)
Install the applicable wing leading-edge access panels.
(5) Install the applicable wing trailing-edge access panels.
Subtask 28-11-00-865-086
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
R 1QA, 2QA, 7QA, 8QA, 11QA, 12QA, 29QA, 30QA, 1QL, 2QL, 1QE, 2QE, 1QU, 2QU, 1QF, 2QF, 1QG, 2QG, 3QG, 4QG.
Subtask 28-11-00-860-067
D. Aircraft Configuration WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
(1)
Retract the spoilers (Ref. TASK 27-60-00-866-002).
(2)
On the spoiler servo-control, make sure that the pointer on the hex. head is opposite the letter 'O' on the housing.
(3)
Retract the flaps fully (Ref. TASK 27-50-00-866-009).
(4)
Refuel, defuel or transfer fuel as necessary (Ref. TASK 28-25-00-869-001) (Ref. TASK 12-11-28-650-003) (Ref. TASK 28-25-00-650-001).
1EFF : ALL 1 28-11-00Page 554 1 1 May 01/04 1 1 1CES 1 Subtask 28-11-00-942-079
E. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the access platform(s).
(5)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(6)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 28-11-00Page 555 1 1 May 01/04R 1 1 1CES 1
TASK 28-11-00-790-007
Leak Test of the Left Wing and Vent Surge Tanks and the Center Tank (without Fuel) by the Vacuum and Dye Procedure
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific manometer
No specific manometer negative press range of 3.00 to 6.00 p.s.i.
(0.207 to 0.414 bars) No specific plastic bag No specific putty No specific safety barriers No specific soft brush No specific syringe No specific vacuum equipment No specific vacuum equipment capable of a negative pressure to
6.00 p.s.i. (0.414 bars)
No specific warning notice
No specific access platform 3.5 m (11 ft. 6 in.)
No specific adjustable access platform 4.0 m (13 ft. 1 in.)
R No specific Torque Wrench : range 5.00 to 35.00 lbf.in R (0.05 to 0.40 m.daN) No specific Torque Wrench : range 36.00 to 220.00 lbf.in
(0.40 to 2.60 m.daN)
98D57204000000 1 DUMMY DOOR-NACA VENT
1EFF : ALL 1 28-11-00Page 556 1 1 May 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-045
FLUORESCENT DYE PIGMENT :INTENSE GREEN DYE
(Ref. 20-31-00)
Material No. 05-045A
FLUORESCENT DYE PIGMENT :BLUISH WHITE DYE
(Ref. 20-31-00)
Material No. 05-046B
YELLOW DYE (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油1(120)
