• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-22 06:45来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 1EFF : ALL 1 28-11-00Page 306 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 307 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 308 1 1 May 01/05 1 1 1CES 1R C. Referenced Information


 **ON A/C 301-399,
 Subtask 28-11-00-410-054-A
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Close the access to the fuel tanks (Ref. TASK 28-10-00-910-002), (Ref. TASK 28-12-45-400-002), (Ref. TASK 28-12-46-400-001), (Ref. TASK 57-27-11-400-001), (Ref. TASK 57-27-11-400-002), (Ref. TASK 57-17-11-400-001). Install these panels: - the wing fuel tank access panels 540AB, 540BB, 540CB, 540DB, 540EB, 540FB, 540GB, 540HB, 540JB, 540KB, 540LB, 540MB 540NB, 540PB, 540QB, 540RB, 550AB, 550BB, 550CB, 550DB 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB, 640HB, 640JB, 640KB, 640LB, 640MB 640NB, 640PB, 640QB, 640RB, 650AB, 650BB, 650CB, 650DB 148AZ.
 **ON A/C ALL
 Subtask 28-11-00-610-050 
R  B. Biocidal Preventive Treatment 
R R R  (1) Do the applicable Biocidal Preventive Treatment (Ref. TASK 28-11-00-600-009), (Ref. TASK 28-11-00-600-009), (Ref. TASK 28-11-00-600-009) or (Ref. TASK 28-11-00-600-009).
 Subtask 28-11-00-942-092
 C. Removal of Equipment
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the safety barriers.
 (3) Remove the access platform(s).
 (4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 

R  TASK 28-11-00-600-008 
R  Biocidal Shock Treatment for Moderate Contamination - With Fuel Mixed with 
R  Biobor Biocide 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  1. Reason for the Job__________________ 
R  Do this procedure not more than 10 days after a sample of fuel is taken and 
R  moderate contamination is found 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  safety barriers 
R  No specific  warning notices 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 17-003 
R  BIOCIDE/FUEL ADDITIVE (Ref. 20-31-00)

 

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 12-11-28-650-003 R 12-32-28-281-001 R 12-32-28-281-003 R R 24-41-00-861-002 R R 24-41-00-862-002 R R 28-00-00-910-001 R 28-11-00-600-008 R R 28-25-00-650-001 R 28-25-00-650-003 R R 31-60-00-860-001 R 31-60-00-860-002 R 32-00-00-481-001 R R 49-32-11-610-001 R 49-32-11-610-002 R 49-32-41-920-001 R 73-11-10-920-001
R 3. Job Set-up
__________
R Subtask 28-11-00-941-102
R A. Safety Precautions Pressure Refuel with Automatic Control Drain Water Content Sample Fuel for Microbiological Contamination Analysis Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Fuel Safety Procedures Biocidal Shock Treatment for Moderate Contamination -With Fuel Mixed with Kathon Biocide Pressure Defuel To Drain Remaining Fuel from the Wing Tanks and the Center Tank EIS Start Procedure EIS Stop Procedure Installation of the Safety Devices on the Landing Gears Servicing of the Fuel Filter (GTCP 36-300) Fuel Filter Element - Removal/Installation (APS 3200) Replacement of the Fuel Filter (8028KM) (131-9(A)) Remove, Inspect and Replace Fuel Filter Element

R WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
R NOTE : This procedure is applicable to MICROBIOLOGICAL CONTAMIN. PROTECT.
____ R MATERIALS (Material No. 17-003) only. The material is Biobor. For R the equivalent procedure with the use of Kathon (Ref. TASK 28-11-R 00-600-008).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油1(83)