Bonding Detail, RIB 22 to RIB 23, Right Hand R Figure A609/TASK 28-00-00-991-117
1EFF : 301-399, 1 28-00-00Page B608 1 1 Nov 01/04 1 1 1CES 1
Bonding Detail, RIB 23 to RIB 24, Right Hand R Figure A610/TASK 28-00-00-991-118
1EFF : 301-399, 1 28-00-00Page B609 1 1 Nov 01/04 1 1 1CES 1
Bonding Detail, RIB 24 to RIB 25, Right Hand R Figure A611/TASK 28-00-00-991-119
R 1EFF : 301-399, 1 28-00-00Page B610 1 1 Nov 01/04 1 1 1CES 1
Bonding Detail, RIB 25 to RIB 26, Right Hand R Figure A612/TASK 28-00-00-991-120
R 1EFF : 301-399, 1 28-00-00Page B611 1 1 Nov 01/04 1 1 1CES 1 1EFF : ALL 1 28-00-00Page B612 1 1 May 01/05 1 1 1CES 1 C. Referenced Information
**ON A/C ALL
TASK 28-00-00-200-002
Dimensional Inspection of the Dowel (Anti-Rotation) on Twin Motor Actuators
WARNING : OBEY THE FUEL SAFETY PROCEDURES._______
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
1. Reason for the Job__________________
R To make sure the anti-rotation dowel dimension is correct.
R R R R NOTE : Only do this procedure on twin motor actuators Part No. HTE190001,____ HTE190001-1, HTE190001-2 and HTE190026. It is not necessary to do this procedure on twin motor actuators Part No. FRH010034 and FRH010041.
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific vernier calliper
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 Material No. 19-003 GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-00-00-991-125 Fig. A613
3. Job Set-up
__________ Subtask 28-00-00-160-051 R A. Cleaning CAUTION : DO NOT TRY TO TURN THE DRIVE OF THE ACTUATOR BECAUSE YOU WILL
_______
CAUSE DAMAGE.
(1)
Use a MISCELLANEOUS (Material No. 19-003) with CLEANING AGENTS (Material No. 11-026) to remove dirt and/or grease from the applicable actuator.
(2)
Make sure that the actuator is clean and in the correct condition.
4. Procedure
_________
(Ref. Fig. A613/TASK 28-00-00-991-125)
Subtask 28-00-00-220-053
A. Dimensional Check
(1) Use a vernier calliper to check the dimension X from the mounting flange face of the actuator to the dowel:
(a)
If the dimension X is more than 1.08 mm (0.0425 in.), the actuator is unserviceable and must be rejected.
(b)
If the dimension X is 1.08 mm (0.0425 in.) or less, the actuator is serviceable.
1EFF : ALL 1 28-00-00Page B613 1 1 May 01/05 1 1 1CES 1
Actuator Dowel (Anti-Rotation) - Dimensional Inspection R Figure A613/TASK 28-00-00-991-125
1EFF : ALL 1 28-00-00Page B614 1 1 Nov 01/04 1 1 1CES 1
5. Close-up
________ Subtask 28-00-00-942-058
A. Removal of Equipment
(1) Make sure that the work area is clean and clear of tool(s) and other items.
1EFF : ALL 1 28-00-00Page B615 1 1 Nov 01/04 1 1 1CES 1 FUEL - GENERAL - REPAIRS
________________________
TASK 28-00-00-300-001
Repair of the Bonding Strip Attachment
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R R Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油1(71)
