A
737-300/400/500MAINTENANCE MANUAL
(b) You can keep Products Research Co. PR-1560M, PR-1560MC, PR-1560MK for 6 months at temperatures between 50°F and 90°F (10.0°C and 32.2°C) from the date of manufacture.
C. Mix the Corrosion Resistant Finish
S 377-111
WARNING: MAKE SURE THERE IS A GOOD FLOW OF AIR IN THE AREA WHERE YOU MIX
_______ THE MATERIALS. MAKE SURE ONLY APPROVED PERSONS WITH RESPIRATORS MIX THE MATERIALS AND ARE IN THE AREA. SOME OF THE MATERIALS USED TO MIX BMS 10-20 TYPE II OR MIL-C-27725 FINISH COMPOUNDS ARE POISONOUS AND FLAMMABLE.
(1)
Make sure the materials are at a temperature between 60°F and 90°F (15.6°C to 32.2°C) before you mix them.
S 377-112
(2)
Measure volumes of these materials in the correct proportion:
(a)
The base material
(b)
The catalyst
(c)
The reducer or thinner if you are scheduled to apply the corrosion resistant finish with a spray gun (Fig. 702).
S 377-113
(3)
Refer to the manufacturer's instructions to mix the base material and the catalyst.
(4)
Add a reducer or a thinner if it is necessary.
S 377-115
(5)
Do not use the corrosion resistant finish until a minimum of 1 hour after you mix it.
S 377-114
NOTE: The maximum usable life of the corrosion resistant finish
____
is 8 hours at 75 |5 °F (23.9 |2.8°C).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ú ALL ú
ú ú ú 02A.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 730Jul 12/02
A
737-300/400/500MAINTENANCE MANUAL
S 977-116
(6) Immediately after you mix the corrosion resistant finish, write this data on the container that contains the finish:
(a)
The date you mixed the finish
(b)
The time you mixed the finish
(c)
The usable life expiration from the initial container of the finish.
S 557-117
(7) Make sure the container with the corrosion resistant finish is tightly closed until you use it.
NOTE: The finish becomes slowly and continuously thicker if you
____ do not keep the containers tightly closed.
TASK 28-11-00-377-118
7. Let the Corrosion Resistant Finish Dry (Cure) Correctly
_______________________________________________________
A. Consumable Materials
(1) Corrosion Resistant Finish for Fuel Tanks
(a) C00307 BMS 10-20, Type II (recommended)
NOTE: BMS 10-20, Type II can be used
____ with BMS 5-26, Type II sealant.
1) 454-4-1, Bostik-Finch, Inc.
CAUTION: USE MIL-C-27725 FINISH MATERIAL ONLY
_______ AS A TOPCOAT. IF MIL-C-27725 IS NOT USED AS A TOPCOAT IT CAN CAUSE DAMAGE.
(b) C00321 MIL-C-27725 1) 823-011 or 823-730, DeSoto Chemical Coatings, Inc.
2) PR-1560M, PR-1560MC, PR-1560MK. Products Research Co.
B. Procedure
S 377-119
(1)
Refer to Fig. 703 to find the correct time to let the corrosion resistant finish dry (cure).
S 377-120
(2)
You can decrease the cure time if you increase the temperature (Fig. 704 thru 707).
S 377-121
(3)
With some finish compounds, you can decrease the cure time if you increase the relative humidity (R.H.) (Fig. 705 thru 707).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ú ALL ú
ú ú ú 02A.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 731Jul 12/02
A
737-300/400/500MAINTENANCE MANUAL
S 287-122
WARNING: DO NOT GET METHYL ETHYL KETONE (MEK) IN YOUR MOUTH OR EYES, OR
_______ ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM MEK. PUT ON A PROTECTIVE SPLASH GOGGLE AND GLOVES WHEN YOU USE MEK. KEEP MEK AWAY FROM SPARKS, FLAME, AND HEAT. MEK IS A POISONOUS AND FLAMMABLE SOLVENT WHICH CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 燃油 FUEL 1(87)