(b)
Turn the panel when it is necessary to let the air vent stack go through the access panel hole.
(c)
Remove the panel from the airplane.
TASK 28-11-11-404-004
5. Access Panel No. 14 Installation (Fig. 401)________________________________
A. General
(1) The No.14 access panels, 65C38139-1/-2, have a flame arrestor/vent scoop installed on them. The No. 13 access panels 65C15617-2 have a pressure relief valve installed on them.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-11
ALL ú ú 02 Page 418 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(2) The No. 14 surge tank access panels with the flame arrestor/vent scoop must be installed with the No. 13 surge tank access panels with the pressure relief valve. If the flame arrestor becomes clogged, and there is no pressure relief valve, the wing can be damaged by the pressure differences.
B. Equipment
(1) Air gun with 90 to 100 psig air supply
C. Consumable Materials
(1)
B00316 Solvent - Aliphatic Naphtha TT-N-95
(2)
B00566 Detergent, Mild
(3)
G00033 Cloth, Lint-free BMS15-5
D. Access
(1)
Location Zones
304 Left Fuel Vent Surge Tank
404 Right Fuel Vent Surge Tank
(2)
Access Panels
7102L Left Wing Surge Tank Vent Scoop Door No.14
7502R Right Wing Surge Tank Vent Scoop Door No.14
E. Prepare for Access Panel Installation
S 214-035
(1)
Examine the open tank for unwanted objects, for example tools, broken pieces of metal, and other unwanted material.
S 164-036
(2)
Clean the open tank, if it is necessary, then continue the access panel installation.
S 214-037
(3)
Examine the screen at the top of the air vent stack for unwanted particles and blocked holes.
S 164-038
(4)
Clean the screen if it is necessary.
(a) Prepare a weak solution of the water and the detergent.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-11
ALL ú ú 02 Page 419 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b)
Clean the air vent stack in the solution.
(c)
Dry the air vent stack with the air gun.
S 164-039
(5)
Clean the surfaces near the access panel opening with a clean, lint-free cloth moist with solvent.
S 164-051
(6)
Clean the surfaces of the access panel which will touch the airplane skin with a clean, lint-free cloth moist with solvent.
S 214-040
(7)
Make sure the phenolic seal ring gasket is serviceable.
(a)
Be specially careful to examine the condition of the molded seal ring inserts.
(b)
Replace the gasket if its condition is unsatisfactory or if you are not sure of its condition.
F. Install Fuel Tank Access Panel No. 14
S 434-041
(1) Do these steps to install the phenolic seal ring gasket:
(a)
Put the phenolic seal ring gasket on the outer flange of the access panel.
(b)
Make sure that the mounting screw holes in the panel and the gasket align in all positions.
(c)
Put some mounting screws into the mounting screw holes to hold the gasket in the correct position.
NOTE: The mounting screw holes in the access panel are not
____
symmetrically spaced.
S 424-042
(2) Do these steps to install the access panel:
(a)
Put the air vent stack through the hole in the wing.
(b)
Align the mounting screw holes on the access panel with the correct holes in the opening of the access panel.
(c) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：737-300 400 500 AMM 飞机维护手册 燃油 FUEL 1(118)
