• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 09:18来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 4. Procedure
_________
 **ON A/C 001-003, 051-052,

 Subtask 38-12-41-420-050
 A. Installation of the Water Faucet
 (Ref. Fig. 402/TASK 38-12-41-991-003)

 (1)
 Clean the component interface and / or the adjacent area.

 (2)
 Do a visual inspection of the component interface and / or the adjacent area.

 (3)
 Remove the blanking plugs from the disconected lines ends.

 (4)
 Put the hoses (9) in position.

 (5)
 Put the fittings (14) in the bracket (13) and tighten the nuts (15).

 (6)
 Install the hoses (12).

 (7)
 Put the hoses (9) in position through the shroud (3) and install the spring clips (8).

 (8)
 Apply clean water to the new O-ring (7).

 (9)
 Install the O-rings (7) on the hoses (9).

 


 (10)
 Carefully install the water faucet (6) on the hoses (9).

 (11)
 Install the washers (11) and the nuts (8).

 (12)
 Put the shroud (3) in position and install the washers (4) and the bolts (5).

 (13)
 Put the mirror (2) in position and install the screw (1).


 (14) Remove the warning notice(s). R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 38-12-41-420-050-A
 A. Installation of the Water Faucet
 (Ref. Fig. 402A/TASK 38-12-41-991-003-A)

 (1)
 Clean the component interface and / or the adjacent area.

 (2)
 Do a visual inspection of the component interface and / or the adjacent area.

 (3)
 Remove the blanking plugs from the disconected lines ends.

 (4)
 Put the hoses assemblies (3) in position.

 (5)
 Put the fittings (10) in the brackets(7) and (11) and tighten the nuts (8).

 (6)
 Remove the blanking plugs from the fittings (10) and install the hoses (9).

 (7)
 Put the hoses (3) in position through the wash basin (4) and install the spring clips (5).

 (8)
 Apply clean water to the new O-ring (5).

 (9)
 Remove the blanking plugs from the disconected lines ends.

 


 (10)
 Apply clean water to the new O-rings (5).

 (11)
 Install the O-rings (5) on the hoses (3).

 (12)
 Carefully install the water faucet (1) on the hoses (3).

 (13)
 Install the screws (3).


 (14) Remove the warning notice(s). **ON A/C ALL
 Subtask 38-12-41-790-050
 B. Leak Test
 (Ref. Fig. 401/TASK 38-12-41-991-001)

 (1)
 If necessary fill the potable water system (Ref. TASK 12-15-38-613-001).

 (2)
 If necessary pressurize the potable water system (Ref. TASK 38-10-00-614-001).

 (3)
 In the lavatory, turn the potable-water shutoff valve (20) to the open position.

 (4)
 In the lavatory, push the water faucet until water flows into the washbasin.

 (5)
 Examine the fittings and the water faucet for leaks.
 NOTE : Leaks are not permitted.


____

 (6)
 If necessary do the adjustment of the water-flow time of the water faucet (Ref. TASK 38-12-00-820-001).

 (7)
 Release the pressure from the potable water system (Ref. TASK 38-10-00-614-002).


 1EFF : ALL 1 38-12-41Page 410 1 1 May 01/05R 1 1 1CES 1


 Subtask 38-12-41-670-054

 C. Do the sterilization of the potable water system (Ref. TASK 38-10-00-670-002). ________
5. Close-up
 Subtask 38-12-41-410-051
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the sanitary cabinet door.

 (3)
 Close the lavatory door.


 1EFF : ALL 1 38-12-41Page 411 1 1 May 01/05R 1 1 1CES 1

 TASK 38-12-41-000-002


 Removal of the Selfclosing - Element
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific special AQUA BUTZKE Key P/N W35-09-61
 No specific 2.5 mm allen key
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WATER/WASTE 1(49)