曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
R | |2.1 | Remote Print Button assignment. | C | not |
R | | | | | assigned|
R |----|------|-----------------------------------------|------|---------|
R |3000|3 | Programmable Start Logic | | |
R | |3.1 | Trigger condition | C | not |
R | | | | | prog. |
R |----|------|-----------------------------------------|------|---------|
R |5000| | The DMU generates the Cruise Performance| | |
R | | | Report based on 'Flight Hours' or | | |
R | | | 'Flight Legs' programmable via GSE. | | |
R | | | | | |
R | | | Logic based on Flight Hours: | | |
R | | | | | |
R | | | During a time frame of 'Y02.1' flight | | |
R | | | hours the DMU search in flight phase 6 | | |
R | | | for report generation with stable frame | | |
R | | | criteria where the best aircraft quality| | |
R | | | number QA is calculated. The report with| | |
R | | | the best quality number QA is stored in | | |
R | | | the report buffer: | | |
R | | | | | |
R | | | Logic based on Flight Legs: | | |
R | | | | | |
R | | | Every 'Y02.2' flight legs the DMU | | |
R | | | searhes in flight phase 6 for report | | |
R | | | generation with stable frame criteria | | |
R | | | where the best A/C quality number QA is | | |
R | | | calculated. The report with the best | | |
R | | | quality number QA is stored in the -| | |
R | | | report buffer. | | |
R | | | | | |
R | |5 | The default programming is 'Flight Legs'| C | Legs |
R | | | | | |
R | |5.1 | 'Y02.1' flight hours | C | T22/T23/|
R | | | | | T23A |
R | | | | | |
R | |5.2 | 'Y02.2' flight legs | C | T22/T23/|
R 1EFF : 159-199, 210-210, 1 31-37-73Page 83 1 1 May 01/05 1 1 1CES 1
+----------------------------------------------------------------------+
|Code|Item | |Progr.|Standard |
| No.|No. | Description of Function Item |MCDU |Value or |
| | | |GSE |Table TXY|
|----|------|-----------------------------------------|------|---------|
R | | | | | T23A |
R | | | | | |
R | |5.3 | 'PO2' stable periods | C | T22/T23/|
R | | | Stable frame basic condition in order to| | T23A |
R | | | avoid report triggering in flight phase | | |
R | | | where parameters are not required. | | |
R | | | | | |
R | |5.4 | HPTL1 < HPT < HPTL2 | | |
R | | | HPT 7C.1.306.01 Eng.1 | | |
R | | | 7C.2.306.10 Eng.2 | | |
R | |5.4.1 | HPTL1 lower limit in % | C | T22/T23/|
R | | | | | T23A |
R | |5.4.2 | HPTL2 upper limit in % | C | T22/T23/|
R | | | | | T23A |
R | | | Stable frame conditions: | | |
R | | | During 'P02' seconds the following | | |
R | | | parameters are stable as defined below: | | |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 5(23)
