• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-24 08:41来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 5. Operation_________
 A. With the Hand Pump
 One end of the flexible hose is put into the fluid container and the other end is connected to the fill valve. Under the action of the hand pump, the fluid is drawn through the flexible pipe to the fill valve. The fluid goes through the filter and the check valve of the fill valve and into the hand pump.
 It is pumped out of the hand pump through the HP filter to the selector valve. The fluid goes from the selector valve into the supply line of the selected reservoir (the other two reservoirs are isolated). The contents indicator shows how much fluid is in the reservoir and a light indicates which reservoir the selector is set to. The fluid flows through the supply line and the check valve to join the LP circuit of the system which is selected. From there it goes into the reservoir via the main system LP return lines.
 B. With a Ground Hydraulic Supply
 The supply is connected to the self-sealing coupling and fluid under pressure flows into the filling system. It goes through the restrictor which decreases the pressure of the fluid. The fluid then flows through the HP filter to the selector valve. From there the operation of the system is the same as when the hand pump is used.


 Filter
 Figure 005
 1EFF :  ALL  1  29-16-00 Page 10 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Hand Pump
 Figure 006
 1EFF :  ALL  1  29-16-00 Page 11 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Reservoir Filling Selector Valve
 Figure 007
 1EFF :  ALL  1  29-16-00 Page 12 
1  1  Feb 01/98
 1  1
 1CES  1

 

 FILTER HP (1132GM) - SERVICING
______________________________
 TASK 29-16-11-610-001
 Servicing of the HP-Filter 1132GM
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
 CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.

 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
 1. Reason for the Job
__________________
 -Replace the filter element.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific warning notices
 No specific container 2.0 l (0.5283 USgal)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
No specific  lockwire 0.8 mm (0.032 in.)
R  Material No. 02-003 F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
filter element  29-16-11 01 -020


 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
 the Ground Connector 29-16-11-991-001 Fig. 301
 3. Job Set-up
__________
 Subtask 29-16-11-010-051
 A. Open the access panel 197CB.
 Subtask 29-16-11-860-050
 B. Aircraft Maintenance Configuration
 (1)
 Obey the hydraulic safety procedures (Ref. TASK 29-00-00-910-002).

 (2)
 Put the warning notices in position to tell persons not to pressurize the Green hydraulic system:

 -In the cockpit on the hydraulic panel 40VU of the overhead panel,
 -On the ground service panel of the Green hydraulic system.

 (3)
 Make sure that the Green hydraulic system is depressurized and put it in the maintenance configuration. (Ref. TASK 29-00-00-864-001).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM HYDRAULIC POWER 液压5(54)