AIRFLOW [106]
BP-BP
Aerodynamic Smoothness Figure 201 (Sheet 16)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú ú N02 Page 229 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
DUCT
ENGINE BIFURCATION FAIRING
[113] (EXAMPLE)
BLOCKER
DOOR
(TURNED 180` CLOCKWISE) (EXAMPLE) BT-BT
BS-BS Aerodynamic Smoothness Figure 201 (Sheet 17)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú
ú N02 Page 230
ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
INLET DUCT
(TURNED 22.5` CLOCKWISE)
BW-BW Aerodynamic Smoothness Figure 201 (Sheet 18)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú ú N02 Page 231 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
TORQUE BOX
[123]
(REF)
THRUST REVERSER INSIDE WALL
Aerodynamic Smoothness Figure 201 (Sheet 19)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú ú N02 Page 232 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
CA-CA
DIAPHRAGM HINGE SUPPORT
Aerodynamic Smoothness
Figure 201 (Sheet 20)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú ú N02 Page 233 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
RECEPTACLE LATCH ASSEMBLY ASSEMBLY
CG-CG CH-CH
Aerodynamic Smoothness Figure 201 (Sheet 21)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-00
ALL ú ú N02 Page 234 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
INLET COWL - REMOVAL/INSTALLATION
_________________________________
1. General
_______
A. This procedure has two tasks. The first task removes the inlet cowl. The second task installs the inlet cowl.
B. The removal and installation procedures are done with a crane that has a minimum capacity of 900 pounds (409.1 Kg). You must use a dynamometer in the hoist configuration unless the crane includes an adjustable load limiter. A load limiter is necessary to prevent large forces on the hoist when the inlet cowl is attached to the engine.
C. The inlet cowl sling has three hoists, adjustable straps, and a sling link. These adjustment tools let the inlet cowl turn around the longitudinal and lateral axes and move vertically while hung.
D. After removal, the inlet cowl is put in storage in the nose up or nose down position as necessary. For storage, you must equally hold the leading edge or the mounting flange on wooden supports with pads or sandbags. If kept in the nose up position, you must prepare the thermal anti-ice (TAI) duct to prevent damage. You must put the supports on a pallet or wheeled platform to make it easier to move.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 动力装置 POWER PLANT 2(60)
