(3)
A71003-40 Torque Equipment - Engine Mount
(4)
A71030-32 Fan Cowl Hold-Open Equipment (optional)
(5)
A78001-22 Thrust Reverser Hold-Open Equipment
(6)
G71023 Hold-Open Equipment - Fan and Core Cowl
Panels (20 Knots)
(7)
Protection pad - commercially available
B.
Consumable Materials
(1)
D00010 Antiseize Compound - Bostick Never-Seez
(2)
D00005 Grease - BMS 3-24
C.
References
(1)
AMM 54-51-03/601, Spring Beam
(2)
AMM 70-23-00/201, Tightening Techniques and Torque Values
(3)
AMM 70-31-01/201, Fluorescent Penetrant Inspection
(4)
AMM 71-11-04/201, Fan Cowl Panels
(5)
AMM 71-11-04/401, Fan Cowl Panels
(6)
AMM 71-21-00/601, Engine Mounts
(7)
AMM 78-31-00/201, Thrust Reverser Systems
D.
Access
(1)
Location Zone
412 Engine 1
422 Engine 2
432 Engine 3
442 Engine 4
E.
Prepare for the Installation of the Power Plant
S 864-085-N00
(1) Make sure the airplane is in the configuration from the Prepare for the Power Plant Removal procedure.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-02
ALL ú ú N06 Page 480 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 234-086-N00
(2) Get new vertical tension bolts (1, 2, and 12) or ones which are examined (Fig. 411).
(a)
Do the fluorescent penetrant inspection of the vertical tension bolts (1, 2, and 12)(AMM 70-31-01/201).
(b)
Examine the threads of the vertical tension bolts (1, 2, and 12) to make sure you can apply a satisfactory locking torque when used with a satisfactory nut.
(c)
Discard all vertical tension bolts (1, 2, and 12) with damage which you can feel with a fingernail or thread damage you can see.
S 644-087-N00
(3)
Apply the antiseize compound to the threads and the shanks of the vertical tension bolts (1, 2, and 12) (Fig. 411).
S 214-088-N00
(4)
Make sure you can tighten the self-locking torque of the barrel nuts (5) to a minimum of 70 pound-inches (7.9 newton-meters).
(a) If the barrel nut (5) cannot hold the minimum torque, replace and examine the self-locking torque again.
S 214-179-N00
(5) Make sure you can tighten the self-locking torque of the nuts (9) to a minimum of 70 pound-inches (7.9 newton-meters).
(a) If the nut cannot hold the minimum torque, replace and examine the self-locking torque again.
S 214-089-N00
(6)
Examine the engine mounts (AMM 71-21-00/601).
S 104-158-N00
(7)
Make sure the mating surfaces of the forward and aft engine mounts do not have oil, grease, and other unwanted material.
S 644-090-N00
(8)
Apply the antiseize compound to the shear pins on the forward and aft engine mounts (Fig. 411).
S 214-091-N00
(9)
Examine the wire bundles in the support beam for the fan cowl for damage and to make sure they are tight.
(10)
If they are installed, open the fan cowl panels (AMM 71-11-04/201).
S 014-111-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-02
ALL ú ú N07 Page 480A ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 044-113-N00
WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(11) Do this procedure: Thrust Reverser Deactivation for Ground Maintenance (AMM 78-31-00/201).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 动力装置 POWER PLANT 2(15)
