曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
_ 2 Until you get the analysis results from the
_ laboratory, do the inspection of the MCD for particles after each flight.
3 After you receive the analysis results, refer to,
_ in this task, paragraph E.(3)(d)1 ) ("If you can identify the contamination material...") and take the appropriate action.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-00-00
ALL ú ú C01 Page 612 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
d) UNSATISFACTORY CONDITION - If you find any number of
________________________ magnetic particles and the largest of the particles is more than or equal to 0.02 inch (0.50 mm) in all dimensions, do the steps that follows: 1 Send the particles to the laboratory for analysis.
_ 2 Do an engine run at high power (70% N1 minimum) for
_ 10 minutes (AMM 71-00-00/501). 3 Do a check of the MCD for particles:
_
a. If you find particles,
_ -Engine operation is limited to five cycles.
-Until you get the analysis results from the laboratory, do the inspection of the MCD for particles after each flight.
-After you receive the analysis results, refer to, in this task, paragraph E.(3)(d)1) ("If you can identify the contamination material ..." ) and take the appropriate action.
b._ If you do not find particles,
-Until you get the analysis results from the laboratory, do the inspection of the MCD for particles after each flight.
-If a subsequent check finds particles, engine operation is limited to five cycles from the time when particles are found.
-After you receive the analysis results, refer to, in this task, paragraph E.(3)(d)1) ("If you can identify the contamination material ..." ) and take the appropriate action.
3) If the CFMI Non-Destructive Test Manual (NDTM), Part 10, and Tooling photographs are not available and you find non-magnetic material that you cannot identify, obey the
____________ ______ limits that follow: a) SATISFACTORY CONDITION - Any number of non-magnetic
______________________ particles is permitted if the largest of the particles is less than 0.4 inch (10 mm) in all dimensions.
b) UNSATISFACTORY CONDITION - If you find any number of
________________________ non-magnetic particles and the largest of the particles is more than or equal to 0.4 inch (10 mm) in all dimensions, do the steps that follow:
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-00-00
ALL ú ú C01 Page 613 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
1 Send the particles to the laboratory for analysis.
_ 2 Do an engine run at high power (70% N1 minimum) for
_ 10 minutes (AMM 71-00-00/501). 3 Do a check of the MCD for particles.
a. If you do not find particles, continue the
_ engine in service. After you receive the analysis results, refer to, in this task, paragraph E.(3)(d)1) ("If you can identify the contamination material...") and take the appropriate action.
b.
If you find particles that are less than 0.2 inch (5 mm) in all dimensions,
-Until you get the analysis results from the laboratory, do the inspection of the MCD for particles after each flight.
-If a subsequent check finds any number of particles that are more than 0.4 inch (10 mm) in all dimensions, engine operation is limited to ten cycles from the time when particles are found.
-After you receive the analysis results, refer to, in this task, paragraph E.(3)(d)1) ("If you can identify the contamination material ..." ) and take the appropriate action.
c.
If you find particles that are more than or equal to 0.2 inch (5 mm) in all dimensions,
-Until you get the analysis results from the laboratory, do the inspection of the MCD for particles after each flight.
-Engine operation is limited to ten cycles.
-After you receive the analysis results, refer to, in this task, paragraph E.(3)(d)1) ("If you can identify the contamination material ..." ) and take the appropriate action.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 滑油 OIL(8)
