• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-30 10:22来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

windscreen and secure with attachment screws.

C.  If previously removed, install outboard support to sidewall extrusion.
D.  Move windscreen into position engaging floor track feet in floor tracks and outboard support arm in guides on upper shelf.
E.  Connect electrical wiring to windscreen.
F.  Tighten nuts on track attachment studs and secure plate to windscreen feet with screws.
G.  Install top attachment.
(1)  
Open aft lowered ceiling access door.

(2)  
Insert top attachment plate downward through hole in lowered ceiling panel and into slot in windscreen frame.

(3)  
Secure top attachment plate to support bracket with bolts.

(4)  
Close aft lowered ceiling access door.


H.  Close circuit breakers.
I.  Install equipment on or in windscreen as required.
541 
25-24-131 Page 404  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  May 01/74 


AFT LEFT WINDSCREEN - REMOVAL/INSTALLATION
1.  Remove Windscreen (Fig. 401)
A.  Open the following circuit breakers on panel P18.
(1)  
NO SMOKING

(2) 
 SEAT BELT

(3)  
WORK AND THRESHOLD LIGHTS


B.  Remove screws securing plates to windscreen feet in floor tracks.
C.  Remove plate from each attachment.
D.  Open aft lowered ceiling access door to gain access to bolts securing top attachment plate.
E.  Support the windscreen, remove bolts through top attachment plate and pull plate upward through slot in lowered ceiling panel.
F.  Disconnect electric wiring from windscreen.
G.  Close aft lowered ceiling access door.
H.  Lift windscreen, moving bottom of windscreen forward or aft slightly to free feet from floor track. Slide windscreen inboard and remove.
I.  If necessary, remove feet from windscreen by removing fasteners attaching each foot to windscreen partition.
J.  If required, remove screws from outboard support and remove clamp and support arm. Reinstall screws to prevent loss of parts.
2.  Install Windscreen (Fig. 401)
A.  If previously removed, locate clamp in place on sidewall outlet and install screws clamping support arm in place.
B.  If previously removed, secure windscreen feet to windscreen partition.
C.  Move partition outboard to engage sidewall support.
May 01/75 25-24-133 Page 401 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.

Aft Left Windscreen Installation  525 
25-24-133 Page 402  Figure 401 (Sheet 1) BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  Aug 1/74 


525  Aft Left Windscreen Installation 
Aug 1/74  Figure 401 (Sheet 2) BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  25-24-133 Page 403 

 

D.  Insert windscreen feet in floor tracks and move partition to installed position.
E.  Place windscreen in its proper position.
F.  Open aft lowered ceiling access door.
G.  Insert top attachment plate downward through hole in lowered ceiling panel and into slot in windscreen support bracket.
H.  Secure top attachment plate to support bracket with two bolts.
I.  Connect electric wiring to windscreen.
J.  Close aft lowered ceiling access door.
K.  Secure plates to windscreen feet with screws.
L.  Close the following circuit breakers on panel P18.
(1)  
NO SMOKING

(2) 
 SEAT BELT

(3)  
WORK AND THRESHOLD LIGHTS


25-24-133 May 01/75 Page 404
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.

AFT RIGHT WINDSCREEN - REMOVAL/INSTALLATION
EFFECTIVITY
ATI INTERIOR
1. General
A.  This procedure applies to the aft windscreens. The aft right windscreen is shown, the aft left windscreen is opposite.
2.  Prepare to Remove Windscreen
A.  Remove electrical power (Ref 24-22-0, MP).
3.  Remove Windscreen (Fig. 401)
A.  Remove screws securing plates to windscreen feet in floor tracks and remove plates.
B.  Remove pin securing windscreen to track fitting and remove fitting from track.
C.  Disconnect bolts from tie-rods which secure windscreen to ceiling structure at inboard and outboard fittings.
D.  Slide windscreen forward or aft to remove from floor tracks.
E.  Disconnect airplane wiring to windscreen in ceiling.
F.  Carefully remove windscreen from its location.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(87)