D. Remove all passenger seats. Remove seat armrest from each emergency exit.
E. Install personnel safety net and stowage bag on sidewall aft of cargo door opening. Net should be installed whenever door is not being used for loading or unloading.
WARNING: TAKE CARE WHEN WORKING IN VICINITY OF OPEN DOOR. INSTALL DOORWAY SAFETY BARRIER TO PREVENT FALLING THROUGH DOORWAY.
F. Remove floor covering (Ref. 25-27-100). Roll carpet segments at each pallet position together into one roll to aid in reinstallation.
G. Install complete cargo system (Ref. 25-56-0).
H. Remove left and right forward curved ceiling panels adjacent to end cap of forward lowered ceiling to expose barrier net fittings located above ceiling (Ref. 25-21-341).
I. Open access door in PSU panel (fwd right side) to expose barrier net fitting located behind PSU.
J. Remove stowage compartment end cap access cover on left side.
K. Remove forward three stowage compartments and closure panels on left side in cargo door area (Ref. 25-24-311).
L. Remove forward four stowage compartments and closure panels on right side opposite cargo door opening (Ref. 25-24-311).
M. Remove small section of floor covering aft of forward galley service door and expose floor air grille.
N. Remove barrier net floor fitting coverplates and stow in personnel safety net stowage bag.
O. Install cargo barrier net (Ref. 25-56-111).
P. Remove emergency exit light located on air conditioning ceiling outlet opposite the overwing emergency exits (Ref. Chapter 33, Emergency Lights).
Q. On the forward overhead panel, operate GASPER FAN switch to OFF. Open GASPER FAN circuit breaker on P6 panel.
R. Close all gasper air outlets and switch off reading lights.
S. Open access door in aft end of forward lowered ceiling and operate passenger oxygen system shutoff valve to closed position (Ref. Chapter 35, Passenger Oxygen System).
T. On cargo attendants' panel, operate window light switch to OFF position and ceiling light switch to CARGO position.
U. Remove aft stowage compartment and closure panel on left and right side (Ref. 25-24-311).
25-09-111 Oct 20/84 Page 202
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.
541 Cabin Accommodation Conversions
Feb 01/75 Figure 201 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 25-09-111 Page 203
V. Operate the forward overhead light fixture air outlet shutoff valve to the opened position.
WARNING: EMERGENCY PROVISIONS FOR PREVENTING SMOKE PENETRATION INTO THE CREW COMPARTMENT REQUIRE THAT THE FORWARD VALVE BE CLOSED IN THE ALL-CARGO CONFIGURATION.
3. Convert Cabin from All-Cargo to All-Passenger Configuration
A. Open main cargo door (Ref. Chapter 52, Main Cargo Door).
B. Install personnel safety net across main cargo door opening while door is open. Net should be installed whenever door is not being used for loading or unloading (Fig. 202).
WARNING: TAKE CARE WHEN WORKING INVICINITY OF OPEN DOOR. INSTALL DOORWAY SAFETY BARRIER TO PREVENT FALLING THROUGH DOORWAY.
C. If desired, operate window light switch to ON position and ceiling light switch to CARGO position, on attendants’ panel.
D. Remove cargo barrier net and install floor fitting coverplates (Ref. 25-56-111).
E. Remove complete cargo system (Ref. 25-56-0).
F. Clean cabin floor as necessary.
G. Install left and right forward curved ceiling panels adjacent to end cap of forward lowered ceiling (Ref. 25-21-341).
H. Close access door in PSU panel.
I. Install stowage compartment end cap access cover on left side.
J. Install three forward stowage compartment and closure panel on left side (Ref. 25-24-311).
K. Install four forward stowage compartment and closure panel on right side (Ref. 25-24-311).
L. Install aft stowage compartment and closure panel on right and left side (Ref. 25-24-311).
M. Install floor covering, including section over floor air grille (Ref. 25-27-100).
N. Remove personnel net stowage bag from sidewall aft of cargo door opening.
O. Install seat armrest on each emergency exit.
P. Install all passenger seats. Arrange seats in accordance with numbered cards placed in seat back pockets during removal. Lock seats to floor tracks installing seat track covers to determine spacing.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(32)
