(1) Manually bring blocker doors to stow position (Ref. TASK 78-32-41-860-001)
Subtask 78-32-42-440-051
D. Make the thrust reverser serviceable. (Ref. TASK 78-30-00-081-041)
F 『 EEFF : ALL E Page 41478-32-42
E E May 01/05 ERE ECES E
F 『
E C F M E
E E
E 56-5B E
E E
Subtask 78-32-42-410-053
E. Close Access
(1) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Remove the access platform(s).
(3) Remove the warning notice(s).
F 『 EEFF : ALL E Page 41578-32-42
E E May 01/05 ERE
ECES E TASK 78-32-42-000-002 Removal of the Upper Rear Fairing
F 『
E C F M E
E E
E 56-5B E
E E
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific plastic scrapper No specific warning notice No specific access platform 1 m (3 ft. 3 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP1039
Material No. CP1041
R R R R R R R R R R R R Material No. Material No. Material No. Material No. Material No. Material No. CP2011 CP2559 CP2560 CP2566 CP2584 CP2656
*
acetone (Ref. 70-30-00)
*
isopropyl alcohol (Ref. 70-30-00)
*
stoddard solvent (Ref. 70-30-00)
*
ardrox 552 (Ref. 70-30-00)
*
turco ind 79 (Ref. 70-30-00)
*
mag-chem teksol (Ref. 70-30-00)
*
degreasol 99 R (Ref. 70-30-00)
*
mag-chem skysol (Ref. 70-30-00)
F 『 EEFF : ALL E Page 41678-32-42
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
78-30-00-481-041 Make the Thrust Reverser Unserviceable for
Maintenance
78-32-42-991-307 Fig. 403
3. Job Set-up
__________
Subtask 78-32-42-941-052
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2).
Subtask 78-32-42-010-056
B. Close Access
(1) Open the fan cowl doors: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Put the access platform in position.
Subtask 78-32-42-040-053
C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041).
F 『 EEFF : ALL E Page 41778-32-42
E E May 01/05 ERE ECES E
F 『
E C F M E
E E
E 56-5B E
E E
4. Procedure
_________
(Ref. Fig. 403/TASK 78-32-42-991-307)
Subtask 78-32-42-020-051
A. Removal of the Upper Rear Fairing
(1) Remove the sealant around the upper rear fairing with a plastic scrapper.
(2) Remove the nuts and screws which attach the upper rear fairing.
(3) Remove the fairing from the pylon.
(4) Remove the sealant from the upper rear fairing and the hinge access panel bracket with a plastic scraper. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM EXHAUST 2(84)
