(0.40 to 2.60 m.daN)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP1039 *
acetone (Ref. 70-30-00)
Material No. CP1041 *
isopropyl alcohol (Ref. 70-30-00) R Material No. CP2011 * R stoddard solvent (Ref. 70-30-00)
Material No. CP2242 *
RTV 732 (Ref. 70-30-00)
Material No. CP2243 *
PR 1750 class B2 (Ref. 70-30-00)
Material No. CP2318 *
blindexite RT 342/2 (Ref. 70-30-00)
Material No. CP2327 *
PR1431 S-1 (Ref. 70-30-00) R Material No. CP2559 * R ardrox 552 (Ref. 70-30-00) R Material No. CP2560 * R turco ind 79 (Ref. 70-30-00)
F 『 EEFF : ALL E Page 40978-32-42
E E May 01/05 E E ECES E F 『 EEFF : ALL E Page 41078-32-42
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R Material No. Material No. Material No. CP2566 CP2584 CP2656 * mag-chem teksol (Ref. 70-30-00) * degreasol 99 R (Ref. 70-30-00) * mag-chem skysol (Ref. 70-30-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
50 strut seals 78-32-01 03 -110
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 71-13-00-410-040 78-30-00-081-041 78-30-00-481-041 78-32-41-080-001 78-32-41-480-001 78-32-41-860-001 78-36-00-010-040 78-36-00-410-040 SPM 70-66-11 SPM 70-66-12 78-32-42-991-305 78-32-42-991-306 Opening of the Fan Cowl DoorsClosing of the Fan Cowl DoorsMake the Thrust Reverser Serviceable after MaintenanceMake the Thrust Reverser Unserviceable for MaintenanceRemoval of the Safety Sleeve from Blocker Door ActuatorInstallation of the Safety Sleeve on Blocker Door ActuatorManual Deployment of the Blocker DoorOpening of the Thrust Reverser DoorsClosing of the Thrust Reverser DoorsFig. 401Fig. 402
E E May 01/05 E E ECES E 3. Job Set-up
F 『
E C F M E
E E
E 56-5B E
E E
__________
Subtask 78-32-42-860-054
A. Aircraft Maintenance Configuration
(1) On the center pedestal, on the ENG panel 115VU, make sure that a warning notice is in position to tell persons not to start the engine.
(2) On the overhead maintenance panel 50VU, make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off. Make sure that a warning notice is in position to tell persons not to energize the FADEC 1(2).
(3) Make sure that the access platform is in position.
(4) Make sure that the blocker door is in the deploy position (Ref. TASK 78-32-41-860-001).
(5) Make sure that the SAFETY SLEEVE - PIVOTING DOOR ACTUATOR (HIX3005) is installed on blocker door (Ref. TASK 78-32-41-480-001).
Subtask 78-32-42-010-054
B. Get Access
(1) Make sure that the fan cowl doors are open: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Make sure that the thrust reverser half doors are open: (Ref. TASK 78-36-00-010-040) FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
Subtask 78-32-42-040-051
C. Make sure that the thrust reverser is unserviceable (Ref. TASK 78-30-00-481-041).
F 『 EEFF : ALL E Page 41178-32-42
E E May 01/05 ERE
ECES E E 56-5B E
F 『
E C F M E
E E
E E
4. Procedure_________ 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM EXHAUST 2(82)
