Hydraulic Control Unit
Figure 601/TASK 78-31-51-991-302
F 『 EEFF : ALL E Page 60478-31-51
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
2. Examine the related hardware of the HCU for:
A. Damage
3. Examine the clogging indicator for:
A. Indication
4. Examine the electrical Connectors for:
A. Tightness
No damage permitted If you find some damage, replace the defective part (Ref. TASK 78-31-51-000-042) and (Ref. TASK 78-31-51-400-042).
The indicator must not be extended If the indicator isextended, replace the hydraulic filter and set the clogging indicator to the operational position (Ref. TASK 78-31-51-000-042) and (Ref. TASK 78-31-51-400-042).
The blue marks of the HCU connectors must be covered by the electrical harness If the blue marks of theHCU connectors arevisible, tighten theelectrical harness
connectors. connectors.
F 『 EEFF : ALL E Page 60578-31-51
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
5. Close-up
________
Subtask 78-31-51-410-055
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the thrust reverser doors: (Ref. TASK 78-36-00-410-040). FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
(3) Remove the access platform(s).
Subtask 78-31-51-440-053
B. Make the thrust reverser serviceable: (Ref. TASK 78-30-00-081-041).
Subtask 78-31-51-410-056
C. Close Access
(1) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Remove the warning notice(s). R
F 『 EEFF : ALL E Page 60678-31-51
E E Nov 01/03 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
THRUST REVERSER STRUCTURE - DESCRIPTION AND OPERATION
_____________________________________________________
1. General
_______ (Ref. Fig. 001) The thrust reverser is attached to the pylon immediately aft of the engine fan case. When stowed, the reverser forms a continuation of the engine fan exhaust nozzle and when deployed, the reverser directs the fan exhaust forwards. The reverser is constructed in two halves that form a bifurcated duct. The reverser halves are hinged at the top to the pylon, clamped to the aft outer flange of the fan case and latched along the bottom centerline. The two complete thrust reverser cowls are wing interchangeable.
R 2. Description
___________
R A. Fixed Structure
R (Ref. Fig. 002, 003)
R Each thrust Reverser half is supported from the pylon by three hinges.
R These hinges are integral with a machined aluminium beam which runs along
R the upper portion of the thrust reverser.
R (1) Outer Barrel
R (Ref. Fig. 004)
R The outer barrel forms the fan flow outer contour. In stow position,
R blocker doors are parts of the outer cowl. The outer barrel has a
R composite honeycomb structure. It consists of graphite skins bonded
R to Nomex honeycomb.
R (2) Inner Barrel
R (Ref. Fig. 004, 005)
R The inner barrel forms the fan flow inner contour and engine outer
R envelope.
R The thrust reverser inner barrel panel incorporates four flush inlet
R holes in the forward section that allow cooling air from the fan duct
R into the engine core compartment. These holes, along with the LPT
R cooling system discharge air, provide the cooling and ventilation for
R the engine core compartment. Air passes through the compartment and
R is exhausted out of the annular opening between the thrust reverser
R and the core nozzle. Right thrust reverser incorporates a flush inlet
R for precooler cold air. The inner barrel is acoustically treated. It
R consists of aluminium perforated face sheet bonded to aluminium
R honeycomb core. The inner (engine side) surface of the inner barrel
R is treated for thermal/fire protection.
F 『 EEFF : ALL E Page 178-32-00
E E Aug 01/04 E E ECES E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 EEFF : ALL E Page 778-32-00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EXHAUST 2(42)
