• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 17:17来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 78-31-49-400-029  Installation of the Left or Right Supply Pipe of the
 Door-Opening Actuator
 78-31-49-400-040  Installation of the Rod Supply Junction Pipe
 78-31-49-400-041  Installation of the Return Pipe of the Left Latch
 78-31-49-400-042  Installation of the Upper Supply Pipe of the Left
 Latch
 78-31-49-400-043  Installation of the Lower Supply Pipe of the Left
 Latch
 78-31-49-400-044  Installation of the Lower Supply Pipe of the Right
 Latch
 78-31-49-400-045  Installation of the Upper Supply Pipe of the Right
 Latch
 78-31-49-400-046  Installation of the Return Pipe of the Right Latch
 78-31-49-400-047  Installation of the Upper Rod Supply Hose
 78-31-49-400-048  Installation of the Rod Supply Pipe of the Left
 Actuator
 78-31-49-400-049  Installation of the Head Supply Pipe of the Left
 Actuator
 78-36-00-010-040  Opening of the Thrust Reverser Doors
 78-36-00-410-040  Closing of the Thrust Reverser Doors
 CMM 71-00-17
 78-31-49-991-303  Fig. 601

 F 『 EEFF : ALL E Page 61978-31-49
 E E Aug 01/05 ERE
ECES E 3. Job Set-up

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E


__________ Subtask 78-31-49-941-090
 A. Safety Precautions
 (1) On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (3) On the overhead maintenance panel 50VU:

 (a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (b) Put a warning notice to tell persons not to energize the FADEC 1(2).

 


 Subtask 78-31-49-010-125
 B. Get Access
 (1) Open the fan cowl doors: (Ref. TASK 71-13-00-010-040). FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
 (2) Put an access platform in position. Subtask 78-31-49-040-106

 C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041). Subtask 78-31-49-010-126


 D. Open the thrust-reverser cowl doors to 33 degree or 35 degree position (as applicable) (Ref. TASK 78-36-00-010-040) FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
 F 『 EEFF : ALL E Page 62078-31-49
 E E Aug 01/05 ERE
ECES E 4. Procedure

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E


_________
 (Ref. Fig. 601/TASK 78-31-49-991-303)
 Subtask 78-31-49-210-053
 A. Do a visual inspection of the hydraulic tubing and hoses as follows:
 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
1. Do the inspection of the pipes for:
 A. Damage  No damage permitted If you find some damage, replace the defective part. (Ref. TASK 78-31-49-000-041) and (Ref. TASK 78-31-49-400-041) or (Ref. TASK 78-31-49-000-042) and (Ref. TASK 78-31-49-400-042) or (Ref. TASK 78-31-49-000-043) and (Ref. TASK 78-31-49-400-043) or (Ref. TASK 78-31-49-000-044) and (Ref. TASK 78-31-49-400-044) or (Ref. TASK 78-31-49-000-045) and (Ref. TASK 78-31-49-400-045) or (Ref. TASK 78-31-49-000-046) and (Ref. TASK 78-31-49-400-046) or (Ref. TASK 78-31-49-000-048) and (Ref. TASK 78-31-49-400-048) or (Ref. TASK 78-31-49-000-049) and (Ref. TASK 78-31-49-400-049) or (Ref. TASK 78-31-49-000-025) and (Ref. TASK 78-31-49-400-025)
 F 『 EEFF : ALL E Page 62178-31-49
 E E Aug 01/05 ERE
ECES  E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E


 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS
 -------------------------------------------------------------------------------or (Ref. TASK 78-31-49-000-026) and (Ref. TASK 78-31-49-400-026) or (Ref. TASK 78-31-49-000-028) and (Ref. TASK 78-31-49-400-028) or (Ref. TASK 78-31-49-000-029) and (Ref. TASK 78-31-49-400-029) or (Ref. TASK 78-31-49-000-001) and (Ref. TASK 78-31-49-400-001) or (Ref. TASK 78-31-49-000-040) and (Ref. TASK 78-31-49-400-040).
 B. Firesleeves cuts, Any number provided  Remove and replace
 tears, chafing  maximum depth does not (Ref. TASK 78-31-49-000-exceed one half of 048) and (Ref. TASK 78-31-sleeve thickness. 49-400-048) or (Ref. TASK
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM EXHAUST 2(29)