R 1EFF : 001-049, 051-099, 101-105, 201-203, 1 27-96-00Page 543 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
11. Close the circuit breakers 52GA (if installed) and 1GA. On the lower ECAM display unit, theELAC 2 legend changes to green.
On the upper ECAM display unit, the ELAC 2 FAULT warning goes out of view.
12. On the overhead panel 23VU: - release the FLT CTL/ELAC 1 pushbutton switch. On the overhead panel 23VU:- the OFF legend of the FLT CTL/ELAC 1pushbutton switch comes on.
On the lower ECAM display unit: - the ELAC 1 legend changes to amber - the ELAC 2 legend remains green.
13. On the overhead panel 23VU: - release the FLT CTL/SEC 1 pushbutton switch. On the overhead panel 23VU:- the OFF legend of the FLT CTL/SEC 1pushbutton switch comes on.
On the overhead panel 24VU: - the FAULT legend of the FLT CTL/ELAC 2 pushbutton switch comes on.
On the lower ECAM display unit: - the SEC 1 legend changes to amber. - the ELAC 2 legend changes to amber.
On the upper ECAM display unit, the ELAC 2 FAULT warning comes into view.
14. On the overhead panel 23VU: - push the FLT CTL/ELAC 1 pushbutton switch. On the overhead panel 23VU:- the OFF legend of the FLT CTL/ELAC 1pushbutton switch goes off.
On the overhead panel 24VU: - the FAULT legend of the FLT CTL/ELAC 2 pushbutton switch goes off.
On the lower ECAM display unit: - the ELAC 1 legend changes to green. - the ELAC 2 legend changes to green.
On the upper ECAM display unit, the ELAC 2 FAULT warning goes out of view.
R 1EFF : 001-049, 051-099, 101-105, 201-203, 1 27-96-00Page 544 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
15. On the overhead panel 23VU:
-push the FLT CTL/SEC 1
pushbutton switch.
16. At the same time:
-
On the CAPT side, push and hold for 10 seconds the takeover and priority pushbutton switch.
-
On the F/O side, move the side stick controller to the left position, then release to the neutral position.
Release the takeover and priority pushbutton switch after 10 seconds.
17. At the same time:
-
On the F/O side, push and hold for 10 seconds the takeover and priority pushbutton switch.
-
On the CAPT side, move the side stick controller to the left position, then release to the neutral position.
Release the takeover and priority pushbutton switch after 10 seconds.
18. On the CAPT side, move the side stick controller to the left position until it touches the stop.
On the overhead panel 23VU:
-the OFF legend of the FLT CTL/SEC 1pushbutton switch goes off.
On the lower ECAM display unit, the SEC
1 legend changes to green.
You can hear an aural warning.
On the F/O side, on the panel 130VU:
-
the red arrow of the SIDE STICKPRIORITY/F/O annunciator comes on.
On the CAPT side, on the panel 131VU:
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵9(128)