5. On the F/O lateral console:
-move the side stick controller around its axis and then to zero.
6. On the CAPT lateral console:
-move the side stick controller around its axis and then to zero.
7.
Close the circuit breaker 20CE2.
8.
On the CAPT and F/O lateral console, on the side stick controllers:
-Move at the same time the two side stick controllers around their axis.
9.
Open the circuit breaker 20CE1.
10.
On the CAPT lateral console, on the side stick controller:
-push the takeover and priority pushbutton switch and hold for 30 seconds.
-
the green CAPT legend goes off when you move the F/O side stick controller back to neutral.
On the panel 130VU:
-
the red arrow of the SIDE STICKPRIORITY/F/O annunciator goes off.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons move and then go back to neutral.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons move and then go back to neutral.
Aural announcement: DUAL INPUT
On the panels 130VU and 131VU, on the SIDE STICK PRIORITY/CAPT and the SIDE STICK PRIORITY F/O annunciators:
-The green CAPT and F/O legends flash simultaneously
Aural announcement.On the panel 130VU :
-the red arrow of the SIDE STICKPRIORITY/F/O annunciator light comeson.
R 1EFF : ALL 1 27-96-00Page 514 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-release the takeover and priority pushbutton switch after 30 seconds.
11. On the CAPT lateral console:
-move the side stick controller around its axis and then to zero.
12. On the F/O lateral console:
-move the side stick controller around its axis and then to zero.
13. On the F/O lateral console, on the side stick controller:
-push and then release the takeover and priority pushbutton switch.
14. On the F/O lateral console:
-move the side stick controller around its axis and then to zero.
15. On the CAPT lateral console:
-move the side stick controller around its axis and then to zero.
16. Close the circuit breaker 20CE1.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons move and then go back to zero.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons stay at neutral.
On the panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator:
-
the green CAPT legend comes on when you move the F/O side stick controller away from neutral,
-
the green CAPT legend goes off when you move the F/O side stick controller back to neutral.
On the panel 130VU :
-
the red arrow of the SIDE STICKPRIORITY/F/O annunciator goes off.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons move and then go back to neutral.
On the lower ECAM display unit, on theF/CTL page:
-
the symbols for the elevators and theailerons move and then go back to neutral.
R 1EFF : ALL 1 27-96-00Page 515 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
17. On the CAPT and F/O lateral console, on the side stick controllers:
-Move at the same time the two side stick controllers around their axis.
**ON A/C ALL
5. Close-up
________
Aural annoucement: DUAL INPUT
On the panels 130VU and 131VU, on the SIDE STICK PRIORITY/CAPT and the SIDE STICK PRIORITY F/O annunciators:
-The green CAPT and F/O legends flash simultaneously
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
Subtask 27-96-00-865-083
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 20CE1
**ON A/C ALL
Subtask 27-96-00-410-052
B. Close Access
(1)
Install the protective cover on the battery power center 105VU.
(2)
Tighten the two screws.
(3)
Close the access door 822.
(4)
Remove the access platform(s).
1EFF : ALL 1 27-96-00Page 516 1 1 Aug 01/05R 1 1 1CES 1
