A320飞机维护手册 AMM 时间限制/维护检查 3(88)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 ZONAL INSPECTION : MAIN LANDING GEAR AND DOORS - INSPECTION/CHECK
_________________________________________________________________
 TASK 05-27-30-200-001 
R R Zonal Inspection of LH/RH Main Landing Gear 
1. Reason for the Job__________________ 
R  Refer to the MPD TASK: ZL-731-01
 2. Job Set-up Information______________________ 
R  Not Applicable
 3. Job Set-up__________
 Subtask 05-27-30-010-050 
R  A. Not Applicable
 4. Procedure_________
 Subtask 05-27-30-210-050
 A. Inspection 
R R  (1) Do a general visual inspection of the main landing gear, left and right sides. This inspection includes the zones 731 and 741.
 (2) Make sure that there are no signs of corrosion, cracks or damage.
R  (3) Make sure that all the installations (wiring, ducting, piping) are attached correctly. 

R TASK 05-27-30-200-002

R  Zonal Inspection of Main Landing Gear Cylinder Door 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: ZL-732-01 
R  2. Job Set-up Information______________________ 
R  Not Applicable 
R  3. Job Set-up__________ 
R  Subtask 05-27-30-010-051 
R  A. Not Applicable 
R  4. Procedure_________ 
R  Subtask 05-27-30-210-051 
R  A. Inspection 
R  (1) Do a general visual inspection of the main landing gear cylinder 
R  door. This inspection includes the zones 732 and 742. 
R  (2) Make sure that there are no signs of corrosion, cracks or damage. 
R  (3) Make sure that all the installations (wiring, ducting, piping) are 
R  attached correctly.

R TASK 05-27-30-200-003

R  Zonal Inspection of Main Landing Gear Secondary Door 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: ZL-733-01 
R  2. Job Set-up Information______________________ 
R  Not Applicable 
R  3. Job Set-up__________ 
R  Subtask 05-27-30-010-052 
R  A. Not Applicable 
R  4. Procedure_________ 
R  Subtask 05-27-30-210-052 
R  A. Inspection 
R  (1) Do a general visual inspection of the main landing gear secondary 
R  door. This inspection includes the zones 733 and 743. 
R  (2) Make sure that there are no signs of corrosion, cracks or damage. 
R  (3) Make sure that all the installations (wiring, ducting, piping) are 
R  attached correctly.

R TASK 05-27-30-200-004

R  Zonal Inspection of Main Landing Gear Main Doors 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: ZL-734-01 
R  2. Job Set-up Information______________________ 
R  A. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  32-12-00-010-001  Open the Main Gear Doors for Access 
R  32-12-00-410-001  Close the Main Gear Doors after Access 
R  3. Job Set-up__________ 
R  Subtask 05-27-30-010-053 
R  A. Get Access 
R  (1) Open the main gear doors 734, 744. (Ref. TASK 32-12-00-010-001) 
R  4. Procedure_________ 
R  Subtask 05-27-30-210-053 
R  A. Inspection 
R  (1) Do a general visual inspection of the main landing gear main doors. 
R  This inspection includes the zones 734 and 744. 
R  (2) Make sure that there are no signs of corrosion, cracks or damage. 
R  (3) Make sure that all the installations (wiring, ducting, piping) are 
R  attached correctly.

 

R 5. Close-up________
R Subtask 05-27-30-410-053
R A. Close Access
R (1) Close the main gear doors 734, 744. (Ref. TASK 32-12-00-410-001)

 ZONAL INSPECTION : DOORS - INSPECTION/CHECK
___________________________________________
 TASK 05-28-00-200-001
 Zonal Inspection of the Doors as far as Visible from the Ground

 1. Reason for the Job
__________________
R R Self Explanatory
 2.
 Job Set-up Information

______________________
 Not Applicable
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 3(88)