(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations are attached correctly.
5. Close-up
________
Subtask 05-25-30-410-050
A. Close Access
R (1) Install the access panels: R 531AT, 631AT.
(2) Remove the access platform(s).
Subtask 05-25-30-866-051
B. Aircraft Maintenance Configuration
(1) Fully retract the flaps (Ref. TASK 27-50-00-866-009)
TASK 05-25-30-200-002
Zonal Inspection of the Flap Track No. 3 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
DEPLOYED IN THE 45 DEG. POSITION.
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-532-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground
27-50-00-866-009 Retraction of the Flaps on the Ground
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
05-25-30-991-001 Fig. 601
**ON A/C 301-399,
05-25-30-991-001-A Fig. 601A
**ON A/C ALL
3. Job Set-up
__________
Subtask 05-25-30-866-052
A. Aircraft Maintenance Configuration
(1) Fully extend the flaps (Ref. TASK 27-50-00-866-008).
Subtask 05-25-30-010-051
B. Get Access
(1) Put an access platform in position.
(2) Remove the access panels 532AT and 632AT. R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 601/TASK 05-25-30-991-001)
**ON A/C 301-399,
(Ref. Fig. 601A/TASK 05-25-30-991-001-A)
**ON A/C ALL
4. Procedure
_________
Subtask 05-25-30-210-051
A. Inspection
(1)
Do a general visual inspection of the flap track No. 3 and the related fairing.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations are attached correctly.
5. Close-up
________
Subtask 05-25-30-410-051
A. Close Access R (1) Install the access panels 532AT and 632AT.
(2) Remove the access platform(s).
Subtask 05-25-30-866-053
B. Aircraft Maintenance Configuration
(1) Fully retract the flaps (Ref. TASK 27-50-00-866-009).
TASK 05-25-30-200-003
Zonal Inspection of the Flap Track No. 4 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
DEPLOYED IN THE 45 DEG. POSITION.
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-533-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground
27-50-00-866-009 Retraction of the Flaps on the Ground
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
05-25-30-991-001 Fig. 601
**ON A/C 301-399,
05-25-30-991-001-A Fig. 601A **ON A/C ALL
3. Job Set-up
__________
Subtask 05-25-30-866-054
A. Aircraft Maintenance Configuration
(1) Fully extend the flaps (Ref. TASK 27-50-00-866-008).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 3(74)
