B. Get Access
(1) Put an access platform in position.
(2) Remove the access panels 533AT and 633AT. R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 601/TASK 05-25-30-991-001)
**ON A/C 301-399,
(Ref. Fig. 601A/TASK 05-25-30-991-001-A)
**ON A/C ALL
4. Procedure
_________
Subtask 05-25-30-210-052
A. Inspection
(1)
Do a general visual inspection of the flap track No. 4 and the related fairing.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations are attached correctly.
5. Close-up
________
Subtask 05-25-30-410-052
A. Close Access R (1) Install the access panels 533AT and 633AT.
(2) Remove the access platform(s).
Subtask 05-25-30-866-055
B. Aircraft Maintenance Configuration
(1) Fully retract the flaps (Ref. TASK 27-50-00-866-009).
TASK 05-25-30-200-004
Zonal Inspection of the Wing Tip
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-534-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4 m (13 ft. 1 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
05-25-30-991-002 Fig. 602
3. Job Set-up
__________ Subtask 05-25-30-010-053
A. Get Access
(1)
Put an access platform in position.
(2)
Remove the access panels 534AB, 534AL, 534BL 634AB, 634AR, 634BR. (Ref. Fig. 602/TASK 05-25-30-991-002)
4. Procedure
_________ Subtask 05-25-30-210-053
A. Inspection
(1)
Do a general visual inspection of the wing tip.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
1EFF : ALL 1 05-25-30Page 612 1 1 May 01/04R 1 1 1CES 1
Access Panels of the Wing Tip Figure 602/TASK 05-25-30-991-002
1EFF : 1 1R 1CES ALL 1 11 1 05-25-30 Page 613 May 01/04
(3) Make sure that all the installations (wiring) are attached correctly.
5. Close-up
________ Subtask 05-25-30-410-053
A. Close Access
(1)
Install the access panels 534AB, 534AL, 534BL, 634AB, 634AR, 634BR.
(2)
Remove the access platform(s).
1EFF : ALL 1 05-25-30Page 614 1 1 May 01/04R 1 1 1CES 1
TASK 05-25-30-200-005
Zonal Inspection of the Flap Track No. 2 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
DEPLOYED IN THE 45 DEG. POSITION.
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-531-02
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 57-55-11-000-001 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-000-004 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-400-001 Installation of the Flap Track Fairings Nos. 2, 3 and
4
57-55-11-400-004 Installation of the Flap Track Fairings Nos. 2, 3 and 4
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
05-25-30-991-001 Fig. 601
**ON A/C 301-399,
05-25-30-991-001-A Fig. 601A
**ON A/C ALL
3. Job Set-up
__________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 3(75)
