A. Aircraft Maintenance Configuration
(1) Fully extend the flaps (Ref. TASK 27-50-00-866-008). R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 05-25-30-010-054
B. Get Access
(1)
Put an access platform in position.
(2)
Remove the access panels (Ref. TASK 57-55-11-000-001):
(Ref. Fig. 601/TASK 05-25-30-991-001)
531AB, 531AL, 531AR,
531AT, 531BB, 531CB,
531DB,
631AB, 631AL, 631AR,
631AT, 631BB, 631CB,
631DB.
**ON A/C 301-399,
Subtask 05-25-30-010-054-A
B. Get Access
(1)
Put an access platform in position.
(2)
Remove the access panels (Ref. TASK 57-55-11-000-004):
(Ref. Fig. 601A/TASK 05-25-30-991-001-A)
531AL, 531AR, 531AT,
531CB, 531DB, 531EB,
531FB,
631AL, 631AR, 631AT,
631CB, 631DB, 631EB,
631FB.
**ON A/C ALL
4. Procedure
_________
Subtask 05-25-30-210-054
A. Inspection
(1)
Do a general visual inspection of the flap track No. 2 and the related fairing.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations are attached correctly.
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 05-25-30-410-054
A. Close Access
(1)
Install the access panels (Ref. TASK 57-55-11-400-001): 531AB, 531AL, 531AR, 531AT, 531BB, 531CB, 531DB, 631AB, 631AL, 631AR, 631AT, 631BB, 631CB, 631DB.
(2)
Remove the access platform(s).
**ON A/C 301-399,
Subtask 05-25-30-410-054-A
A. Close Access
R R (1) Install the access panels (Ref. TASK 57-55-11-400-004): 531AL, 531AR, 531AT, 531CB, 531DB, 531EB, 531FB, 631AL, 631AR, 631AT, 631CB, 631DB, 631EB, 631FB.
(2) Remove the access platform(s).
**ON A/C ALL
Subtask 05-25-30-866-057
B. Aircraft Maintenance Configuration
R (1) Fully retract the flaps (Ref. TASK 27-50-00-866-009).
TASK 05-25-30-200-006
Zonal Inspection of the Flap Track No. 3 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
DEPLOYED IN THE 45 DEG. POSITION.
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-532-02
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 57-55-11-000-001 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-000-004 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-400-001 Installation of the Flap Track Fairings Nos. 2, 3 and
4
57-55-11-400-004 Installation of the Flap Track Fairings Nos. 2, 3 and 4
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
05-25-30-991-001 Fig. 601
**ON A/C 301-399,
05-25-30-991-001-A Fig. 601A **ON A/C ALL
3. Job Set-up
__________
Subtask 05-25-30-866-058
A. Aircraft Maintenance Configuration
(1) Fully extend the flaps (Ref. TASK 27-50-00-866-008). R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 05-25-30-010-055
B. Get Access
(1)
Put an access platform in position.
(2)
Remove the covers:
(Ref. Fig. 601/TASK 05-25-30-991-001) 532AL, 532AR, 532AT, 532DB, 632AL, 632AR, 632AT, 632DB (Ref. TASK 57-55-11-000-001).
(3)
Remove the flap track fairings:
532AB, 532BB, 532CB,
632AB, 632BB, 632CB
(Ref. TASK 57-55-11-000-001).
**ON A/C 301-399, 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 3(76)
