BatteryRemovaland Installation (Alkaline) 1 TestingEmergencyLocatorTransmitter 3 Pilot'sRemoteSwitch 3 TestingPilot'sRemoteSwitch 4 InadvertentActivation 5
25-70-00
AccessoryCompartments 1
EFFECTIVITY:
040-999
Jan10/90
CONTENTS
PIPERAIRCRAFT
PA-42-720(AdvancedTrainer)
MAINTENANCEMANUAL
Equipment/ Furnishings
A. FlightCompartments
1.
RemovalofCrewSeats
(a.)Removeequipmentasnecessary.
(b.)Removeseattrackendcoversandseatstops.
(c.)Moveseatto slotsinseattracksandliftseatofftracks.
2.
InstallationofCrewSeats
(a.)Placeseatintoslotsin seattracks.
(b.)Moveseattodesiredposition.
(c.)Installseattrackendcoversandseatstops.
(d.)Reinstallotherequipmentremoved.
SmokeGoggles (IFINSTALLED)
-Flashlight
FireExtinguisher
(BEHINDPILOTSEATONLY)
SeatRecline Handle
CrewSeatInstallation
Figure401
EFFECTIVITY:
040-999
PAGE
25-10-00
Jan10/90
PIPERAIRCRAFT
PA-42-720 (Advanced Trainer)
MAINTENANCEMANUAL
A. PassengerCompartment
1. Removalof Passenger Seats
(a) Removetables and other equipment as necessary.
(b.) Remove seat track end covers and seat stops
(c.) Move seat to slots in seat tracks and lift seat off tracks.
2.
Installationof passenger seats.
(a.) Place seat into slots in seat tracks.
(b.)Move seat to desired position.
(c.) Install seat track end covers and seat stops.
(d.) Install tables or other equipment that may have been removed.
3.
Removalof Cabinets and Tables.
(a) Removecabinetsas follows:
(1.) Turn off electrical power.
(2.) Slide seats as necessary for easier access.
(3.) Disconnect and tag electricalwiring.
(4.) Remove attachinghardware. (It may be necessary to remove drawersand open tambor
doors to gain accessto some mounting hardware.)
(5.) Remove cabinet.
(b) Installcabinetsas follows:
(1.) Turn off electrical power.
(2.) Slide seats as necessary for easier access.
(3.) Position cabinetto proper location.
(4.) Connect electricalwiring.
(5.) Attach mounting hardware.
(6.) Insert drawers that may have been removed for cabinet removal.
(c) Removetablesas follows:
(1.) Lift table to open positionor remove table leaf from table frame for easier access.
(2.) Remove attachinghardwarefromunderneathtable plate assembly.
(3.) Remove table.
(d) Installtables as follows:
(1.) Position table to proper location.
(2.) Attach mounting hardware.
(3.) Install table leaf if it was removed.
EFFECTIVITY:
25-20-00
Jan 10/90
PIPER AIRCRAFT
PA-42-720 (Advanced Trainer)
MAINTENANCEMANUAL
A. PassengerCompartments(continued)
4. Removaland Installation of Curtain.
(a)
Removecurtainas follows:
(1.) Removecurtain track end covers.
(2.) Slide curtain from track.
(b)
Installcurtain as follows:
(1.) Position curtain onto track.
(2.) Install curtain track end covers.
5. Removal of Nav Kit TieDown Assembly.
(a.) Remove mountingbolts attaching nav kit tie down assembly to seat track. (b.) Remove assembly.
6.
Installationof Nav Kit TieDownAssembly.
(a.) Position assemblyto proper location.
(b.) Attach mounting bolts to secure assemblyto seat track.
7.
Removal of Observer Console Covers (a.) Turn off electrical power. NOTE: Console coversare attached to console frame with Velcro material. (b.) Disconnect communicationsystem.
(c.) Remove topcover by prying off with hands.
(d.) Remove bottomcover by prying off with hands.
8.
Installationof Observer Console Covers.
(a.)Turn off electrical power.
(b.) Position and secure bottom cover into proper location.
(c.) Position and secure top cover into proper location.
(d.) Connect communicationsystem.
EFFECTIVITY:
040-999
Jan 109025-20-00
PIPERAIRCRAFT
PA-42-720(AdvancedTrainer)
MAINTENANCEMANUAL
A. PassengerCompartment(continued)
Seat ReclineButton-Located on insidesurfaceofleftarmrest (RightSideForwardPassenger SeatDoesNotRecline)
SeatTrackLatch
ReleaseHandle
PassengerSeatInstallation Figure 401
EFFECTIVITY:
040-999
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：夏延飞机维护手册 Cheyenne IIIA PA-42-720 AMM 1(88)
