(Ref. Fig. 639A/TASK 57-53-00-991-044-A)
**ON A/C ALL
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
EDGE:
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 57-53-00-220-066
A. Dimensions of the Joint that Connects the Flap to the Carriage (Tracks 3 and 4).
(1) Do a check of the dimensions that follow:
Outboard Flap - Fits and Clearances (Tracks 3 and 4)
Figure 639/TASK 57-53-00-991-044
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-53-00Page B660 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Outboard Flap - Fits and Clearances (Tracks 3 and 4)
Figure 639A/TASK 57-53-00-991-044-A
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 31.975 | 31.991 | | | 31.945 | | | | OD 3 |(1.2588) |(1.2594) | | |(1.2576) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | A | 32.000 | 32.025 | | | | 32.055 | | | ID 2 |(1.2598) |(1.2608) | | | |(1.2620) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-067
B. Dimensions of the Joint that Connects the Flap to the Carriage (Tracks 3 and 4).
(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 39.975 | 39.991 | | | 39.945 | | | | OD 2 |(1.5738) |(1.5744) | | |(1.5726) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | A | 40.000 | 40.025 | | | | 40.055 | | | ID 1 |(1.5748) |(1.5757) | | | |(1.5769) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-068
C. Dimensions of the Joint that Connects the Flap to the Carriage (Tracks 3 and 4).
(1) Do a check of the dimensions that follow:
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-53-00Page B662 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 31.975 | 31.991 | | | 31.950 | | | | OD 3 |(1.2588) |(1.2594) | | |(1.2578) | | | | | | | 0.009 | 0.041 | | | 0.091 | | | | | (0.0003)| (0.0016)| | |(0.0035)| | A | 32.000 | 32.016 | | | | 32.041 | | | ID 4 |(1.2598) |(1.2604) | | | |(1.2614) | | -------------------------------------------------------------------------------
**ON A/C 301-399,
Subtask 57-53-00-220-066-A
A. Dimensions of the Joint that Connects the Flap to the Carriage (Track 3).
(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 41.975 | 41.991 | | | 41.945 | | | | OD 17 |(1.6525) |(1.6531) | | |(1.6513) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | A | 42.000 | 42.025 | | | | 42.055 | | | ID 15 |(1.6535) |(1.6545) | | | |(1.6557) | | -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼5(30)
