Subtask 32-33-00-010-060
B. Get Access
(1) Install the GROUND LOCK SLEEVE (460005833) or the GROUNDLOCK SLEEVE
R (460007280) on each MLG and the GROUND SAFETY LOCK (D23080000) on the NLG (Ref. TASK 32-00-00-481-001) .
(2)
Open the NLG doors (Ref. TASK 32-22-00-010-001).
(3)
Install the SAFETY PIN - NLG DOOR (98D32203502000) in each NLG door (Ref. TASK 32-00-00-481-002).
(4)
Open the MLG doors (Ref. TASK 32-12-00-010-001).
(5)
Install a GROUND LOCK SLEEVE (460005835) on each MLG door actuator (Ref. TASK 32-00-00-481-002).
1EFF : ALL 1 32-33-00Page 510 1 1 Aug 01/05 1 1 1CES 1
(6)
Make sure that the free-fall mechanism on the NLG and MLG door and gear uplocks has gone back to the normal position (system reset).
(7)
Make sure the input levers of the cutout valve (2515GM) and the vent valves (2516GM, 2532GM) have gone back to the normal position.
Subtask 32-33-00-410-067
C. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
(3) Close the MLG doors (Ref. TASK 32-12-00-410-001).
Subtask 32-33-00-860-065
D. Aircraft Maintenance Configuration
(1) On panel 20VU, set the IR OFF/NAV/ATT switches to OFF, as applicable.
R (2) Do the EIS stop procedure. R
(3) Remove the access platform(s).
Subtask 32-33-00-862-050
E. De-energize the Electrical Circuits
(1) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
Subtask 32-33-00-582-051
F. Lower the Aircraft
(1) Lower the aircraft off jacks (Ref. TASK 07-11-00-586-002).
Subtask 32-33-00-869-080
G. Ground Configuration
(1) If you did the flight configuration precautions, put the aircraft back to the ground configuration (Ref. TASK 32-00-00-860-002).
1EFF : ALL 1 32-33-00Page 511 1 1 Aug 01/03 1 1 1CES 1 Subtask 32-33-00-942-050
H. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3)
Remove the warning notice(s).
1EFF : ALL 1 32-33-00Page 512 1 1 Feb 01/98 1 1 1CES 1R TASK 32-33-00-720-004
R Functional Test of the NLG Free-Fall Extension
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ R START A TASK ON OR NEAR: R - THE FLIGHT CONTROLS R - THE FLIGHT CONTROL SURFACES R - THE LANDING GEAR AND THE RELATED DOORS R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ R GEAR.
R 1. Reason for the Job
__________________
R Self Explanatory
R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION R -------------------------------------------------------------------------------
R No specific rod - non metallic R No specific safety barriers R No specific spring balance capable of 5.0 da.N. R No specific warning notice R 98F32304000000 4 FALSE TARGET
R B. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 07-11-00-581-003 R R 07-11-00-586-001 R R 24-41-00-862-002 R R 29-10-00-863-001 R 29-10-00-864-001 R 31-60-00-860-001 Lifting of the Aircraft at Forward Jacking Point, MLG Wheels on the Ground Lowering of the Aircraft at Forward Jacking Point, MLG Wheels on the Ground De-energize the Aircraft Electrical Circuits Supplied from the External Power Pressurize the Green Hydraulic System Depressurize the Green Hydraulic System EIS Start Procedure
1EFF : ALL 1 32-33-00Page 513 1 1 Feb 01/02 1 1 1CES 1 1EFF : ALL 1 32-33-00Page 514 1 1 Nov 01/04 1 1 1CES 1 Subtask 32-33-00-582-057
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R R R R 31-60-00-860-002 32-00-00-481-001 32-00-00-481-002 32-00-00-860-001 32-00-00-860-002 32-12-00-010-001 32-12-00-410-001 32-22-00-010-001 32-22-00-410-001 32-33-00-991-001 EIS Stop ProcedureInstallation of the Safety Devices on the Landing GearsInstallation of the Safety Devices on the Landing Gear Doors Flight Configuration Precautions with Electrical Power Ground Configuration after Flight Configuration with Electrical PowerOpen the Main Gear Doors for AccessClose the Main Gear Doors after AccessNose Gear Doors - Ground Doors OpeningNose Gear Doors - Ground Doors ClosingFig. 501
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架5(99)
