4. Procedure
_________
**ON A/C 001-049, 051-061, 101-105, 201-203,
(Ref. Fig. 602/TASK 32-22-00-991-003)
1EFF : ALL 1 32-22-00Page 607 1 1 Aug 01/05 1 1 1CES 1
NLG Doors - Gaps Figure 602/TASK 32-22-00-991-003- 12 (SHEET 1)
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 32-22-00Page 608 1 1 May 01/05 1 1 1CES 1
NLG Doors - Gaps Figure 602/TASK 32-22-00-991-003- 22 (SHEET 2)
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 32-22-00Page 609 1 1 May 01/05 1 1 1CES 1 **ON A/C 062-099, 151-199, 204-212,
(Ref. Fig. 602A/TASK 32-22-00-991-003-A)
R **ON A/C 106-149, 213-299, 301-399, 401-499,
(Ref. Fig. 602B/TASK 32-22-00-991-003-B)
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-212,
(Ref. Fig. 603/TASK 32-22-00-991-004)
R **ON A/C 106-149, 213-299, 301-399, 401-499,
(Ref. Fig. 603A/TASK 32-22-00-991-004-A)
**ON A/C 001-049, 051-061, 101-105, 201-203,
Subtask 32-22-00-220-050
A. Check of the NLG Doors Gaps and Mismatches
(1)
Measure the NLG doors gaps and make sure that:
-
the dimension P is between 7.00 mm (0.2755 in.) and 9.00 mm (0.3543 in.).
-
the dimension R is between 2.50 mm (0.0984 in.) and 5.50 mm (0.2165 in.).
-
the dimension T is between 4.00 mm (0.1574 in.) and 6.00 mm (0.2362 in.).
-
the dimension U is between 8.50 mm (0.3346 in.) and 11.5 mm (0.4527 in.).
-
the dimension V is between 5.50 mm (0.2165 in.) and 8.50 mm (0.3346 in.).
-
the dimension W is between 7.50 mm (0.2952 in.) and 10.5 mm (0.4133 in.).
(2)
Check of the NLG doors mismatches.
(a) Measure the longitudinal mismatches and make sure that the dimension L is between -2 mm (-0.0787 in.) and +2 mm (+0.0787 in.).
1EFF : ALL 1 32-22-00Page 610 1 1 Aug 01/05 1 1 1CES 1 NOTE : A dimension L between -3 mm (-0.1181 in.) and +3 mm
____ (+0.1181 in.) is permitted on a length of 378 mm (14.8818 in.), i.e. 5 % of the sum of the longitudinal dimensions.
(b) Measure the transversal mismatches and make sure that the dimension M is between -1 mm (-0.0393 in.) and +1 mm (+0.0393 in.).
NOTE : A dimension M between -2 mm (-0.0787 in.) and +2 mm
____ (+0.0787 in.) is permitted on a length of 140 mm (5.5118 in.), i.e. 5 % of the sum of the transversal dimensions.
R **ON A/C 062-099, 151-199, 204-212,
Subtask 32-22-00-220-050-A
A. Check of the NLG Doors Gaps and Mismatches
(1)
Measure the NLG doors gaps and make sure that:
-
the dimension P is between 7.00 mm (0.2755 in.) and 9.00 mm (0.3543 in.).
-
the dimension R is between 2.50 mm (0.0984 in.) and 5.50 mm (0.2165 in.).
-
the dimension T is between 4.00 mm (0.1574 in.) and 6.00 mm (0.2362 in.).
-
the dimension U is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
-
the dimension V is between 5.50 mm (0.2165 in.) and 8.50 mm (0.3346 in.).
-
the dimension W is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
(2)
Check of the NLG doors mismatches.
(a) Measure the longitudinal mismatches and make sure that the dimension L is between -2 mm (-0.0787 in.) and +2 mm (+0.0787 in.).
NOTE : A dimension L between -3 mm (-0.1181 in.) and +3 mm
____ (+0.1181 in.) is permitted on a length of 378 mm (14.8818 in.), i.e. 5 % of the sum of the longitudinal dimensions.
(b) Measure the transversal mismatches and make sure that the dimension M is between -1 mm (-0.0393 in.) and +1 mm (+0.0393 in.).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 32-22-00Page 611 1201-212, 1May 01/05 1 1 1CES 1
NLG Doors - Gaps
Figure 602A/TASK 32-22-00-991-003-A12 (SHEET 1)
R 1EFF : 062-099, 151-199, 204-212, 1 32-22-00Page 612 1 1 May 01/05 1 1 1CES 1
NLG Doors - Gaps
Figure 602A/TASK 32-22-00-991-003-A22 (SHEET 2)
R 1EFF : 062-099, 151-199, 204-212, 1 32-22-00Page 613 1 1 May 01/05 1 1 1CES 1
NLG Doors - Gaps
Figure 602B/TASK 32-22-00-991-003-B13 (SHEET 1)
R 1EFF : 106-149, 213-299, 301-399, 401-499, 1 32-22-00Page 614 1 1 Aug 01/05 1 1 1CES 1
NLG Doors - Gaps
Figure 602B/TASK 32-22-00-991-003-B23 (SHEET 2)
R 1EFF : 106-149, 213-299, 301-399, 401-499, 1 32-22-00Page 615 1 1 Aug 01/05 1 1 1CES 1
NLG Doors - Gaps
Figure 602B/TASK 32-22-00-991-003-B33 (SHEET 3)
R 1EFF : 106-149, 213-299, 301-399, 401-499, 1 32-22-00Page 616 1 1 Aug 01/05 1 1 1CES 1 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架4
