R MLG-Bay Cable-Tension Graph - Weight on Wheels Figure 606/TASK 32-33-00-991-006
1EFF : 1 1 1CES ALL 1 111 32-33-00 Page 616 Aug 01/05
R R MLG-Bay Cable-Tension Graph - Weight on Jacks Figure 607/TASK 32-33-00-991-023
1EFF : 1 1 1CES ALL 1 111 32-33-00 Page 617 Aug 01/05
Subtask 32-33-00-480-061
E. Installation of the Rigging Pins
(Ref. Fig. 604/TASK 32-33-00-991-003)
(1)
Put in the RIGGING PIN (98A27801001000) at position Pin 1.
(2)
Put in the RIGGING PIN (98A27003001000) at position Pin 2.
(3)
Put the RIGGING PIN (98DNSA20208060) at positions Pin 3 and Pin 4.
(4)
Put in the PIN, RIGGING - RUDDER CONTROL (98A27901002000) at position Pin 5.
(5)
Make sure that the pins lock the related pulley, cable quadrant or lever.
(6)
Install a wedge on each side of the GRAVITY GEAR EXTN handle to lock the handle in position.
Subtask 32-33-00-220-053
F. Check the Tension of the NLG Free-Fall Extension Cables
(1) Do a check of the NLG free-fall extension cable tension again, as specified in paragraph 4 A.
Subtask 32-33-00-220-054
G. Check the Tension of the MLG Free-Fall Extension Cables
(1) Do a check of the MLG free-fall extension cable tension again, as specified in paragraph 4 B.
5. Close-up
________ Subtask 32-33-00-080-059
A. Removal of the Rigging Pins
(Ref. Fig. 604/TASK 32-33-00-991-003)
(1)
Remove the RIGGING PIN at position Pin 1.
(2)
Remove the RIGGING PIN at position Pin 2.
(3)
Remove the RIGGING PIN at positions Pin 3 and Pin 4.
1EFF : ALL 1 32-33-00Page 618 1 1 Aug 01/05R 1 1 1CES 1
(4) Remove the PIN, RIGGING - RUDDER CONTROL at position Pin 5.
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 32-33-00-410-050
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
On the panel 110VU, remove the wedges from the GRAVITY GEAR EXTN handle.
(3)
Install the cockpit floor panels 211FF, 211JF (Ref. TASK 53-12-11-400-001).
(4)
Install the passenger-compartment floor panels 241LF and 242LF (Ref. TASK 53-32-12-400-002).
(5)
Install the passenger seats (Ref. TASK 25-21-41-400-001).
(6)
Install the forward cargo-compartment ceiling panels 131AC, 131BC, 131CC.
(7)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(8)
Close the lateral avionics-compartment door 822.
(9)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(10) Close the NLG doors (Ref. TASK 32-22-00-410-001). R **ON A/C 151-199, 401-499,
Subtask 32-33-00-410-050-A
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
On the panel 110VU, remove the wedges from the GRAVITY GEAR EXTN handle.
1EFF : ALL 1 32-33-00Page 619 1 1 Aug 01/05 1 1 1CES 1
(3)
Install the cockpit floor panels 211FF, 211JF (Ref. TASK 53-12-11-400-001).
(4)
Install the passenger-compartment floor panels 241LF and 242LF (Ref. TASK 53-32-12-400-002).
(5)
Install the passenger seats (Ref. TASK 25-21-41-400-001).
(6)
Install the forward cargo-compartment ceiling panels 131MC, 131NC.
(7)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(8)
Close the lateral avionics-compartment door 822.
(9)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(10) Close the NLG doors (Ref. TASK 32-22-00-410-001). **ON A/C ALL
Subtask 32-33-00-942-051
C. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-33-00Page 620 1 1 Aug 01/05R 1 1 1CES 1
TASK 32-33-00-200-002
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架5(127)
