(3)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
5. Close-up
________ Subtask 32-31-73-942-057
A. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-31-73Page 519 1 1 Aug 01/05R 1 1 1CES 1
TASK 32-31-73-820-002
Adjustment of the MLG Extension Proximity Sensors 20GA, 21GA, 22GA, 23GA
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
To set the clearances of the MLG extension proximity sensors to the correct
dimensions.
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific jack (screw) 522 mm (21 in.) No specific safety barriers No specific warning notice No specific 28V D.C. supply No specific access platform 2 m (6 ft. 7 in.) No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft) 460005842 1 LAMP BOX
1EFF : ALL 1 32-31-73Page 520 1 1 Aug 01/05R 1 1 1CES 1
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-047 C Z-11.904
ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT)
(Ref. 20-31-00) Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 spacer 32-11-11 83 -150 2 spacer 32-11-11 83C-150 2 spacer 32-11-11 83D-150 5 spacer 32-11-11 83 -150 5 spacer 32-11-11 83C-150 5 spacer 32-11-11 83D-150 7 spacer 32-11-11 22B-390 12 spacer 32-11-11 22B-430 16 spacer 32-11-11 53 -028 16 spacer 32-11-11 53C-050 16 spacer 32-11-11 53D-050
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 07-11-00-582-002 Jacking - General 12-14-32-614-003 Check Charge Pressure of Main Landing Gear Shock
Absorber 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 29-10-00-864-001 Depressurize the Green Hydraulic System 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
1EFF : ALL 1 32-31-73Page 521 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-00-00-860-002 Ground Configuration after Flight Configuration with
Electrical Power
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
32-69-00-740-001 BITE Check Landing Gear Control Interface Unit
(LGCIU) using MCDU to Ensure that Continuous BITE is Operative
**ON A/C 001-003, 051-052,
32-31-73-991-017-A Fig. 505
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-31-73-991-017-B Fig. 505A
**ON A/C 001-003, 051-052,
32-31-73-991-032-A Fig. 506
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-31-73-991-032-B Fig. 506A
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-31-73-941-059
A. Safety Precautions
(1)
Put the safety barriers in position.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架5(60)
