A320飞机维护手册 AMM LANDING GEAR 起落架5(75)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 49VU FLIGHT CONTROLS/FCDC1/SPLY 49VU L/G/LGCIU/SYS1/NORM 49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 49VU NAV PROBES/ADIRU1/115VAC  15CE1 20CE1 1GA 5FP1 4FP1  B11B10C09F07F06
 **ON A/C 001-049, 051-061, 101-105, 201-203,
 121VU ADIRS/ADIRU/3/26VAC AND AOA 121VU ADIRS/ADIRU/3/115VAC  5FP3 4FP3  N08N06
 **ON A/C ALL
 121VU HYDRAULIC/BRAKING AND STEERING/SYS2/SPLY 121VU HYDRAULIC/BRAKING AND STEERING/SYS2/CTL 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/CTL 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/IND AND/SPLY 121VU ENGINE/ENG2/OIL/PRESS 121VU ENGINE/ENG1/OIL/PRESS 121VU HYDRAULIC/LGCIU/SYS2 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 121VU FLIGHT CONTROLS/FCDC2/SPLY 121VU FLIGHT CONTROLS/SEC3/SPLY 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY  4GG 3GG 1GG 2GG 2EN2 2EN1 2GA 52GA 20CE2 21CE3 15CE2  M36M35M34M33N42N40Q35Q34Q20Q19R20 
R  **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 121VU ADIRS/ADIRU/3/26VAC AND AOA 121VU ADIRS/ADIRU/3/115VAC  5FP3 4FP3  N07N05

 1EFF : ALL 1 32-31-73Page 573 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 Subtask 32-31-73-860-064
 P. Aircraft Maintenance Configuration
 (1)
 If you did the flight configuration precautions, put the aircraft back to the ground configuration (Ref. TASK 32-00-00-860-002).

 (2)
 Connect the isolation coupling of the PTU (Ref. TASK 29-23-00-860-002).

 (3)
 Pressurize the applicable hydraulic reservoirs (Ref. TASK 29-14-00-614-002).

 5. Close-up
________ Subtask 32-31-73-410-065
 A. Close Access
 (1) Remove the SAFETY PIN - NLG DOOR from each of the NLG doors.
 (2) Close the NLG doors (Ref. TASK 32-22-00-410-001). Subtask 32-31-73-942-061
 B. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-31-73Page 574 1 1 Aug 01/05R 1 1 1CES 1

 TASK 32-31-73-820-006
 Adjustment of the NLG Extension/Steering Proximity Sensors 24GA, 25GA
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
 To set the clearances of the NLG extension proximity sensors to the correct dimensions.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)
 No specific non-metallic scraper
 No specific non-metallic wedge
 No specific safety barriers

R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) M46214 1 ADJUSTMENT TOOL 98D32203502000 3 SAFETY PIN - NLG DOOR
 1EFF : ALL 1 32-31-73Page 575 1 1 May 01/05 1 1 1CES 1 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-111 Material No. 05-112 Material No. 08-001
Material No. 09-001 Material No. 09-008E Material No. 11-026 Material No. 19-003
C. Expendable Parts
 NITRIC ACID (Ref. 20-31-00)
C Z-23.546
 SODIUM DICHROMATE (Ref. 20-31-00)
USA DOD-A-82720
 GENERAL PURPOSE ADHESIVE HONEYCOMB FILLER
 (Ref. 20-31-00)
USA MIL-S-8802 TYPE I CLASS A
 FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)
USA AMS 3277
 EARLY QUICK REPAIR FUEL TANK SEALANT (Ref. 20-31-00)
GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R  35  shim 
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架5(75)