- do the BITE test of the VOR/MKR (Ref. AMM TASK 34-55-00-740-002).
(a) If the BITE test gives a maintenance message related of a RMP 2 failure:
- replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
1 If the fault continues:
_
- do a check and repair the wiring of the NAV DATA OUTPUT bus from the COM/NAV FREQ SEL RMP 2 (1RG2) to the first terminal block (Ref. ASM 34-51/01).
(b) If the BITE test does not give a maintenance message related of a RMP 2 failure:
- replace the INTRG-DME, 2 (2SD2) (Ref. AMM TASK 34-51-33-000-001) and (Ref. AMM TASK 34-51-33-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-51-00∞∞∞∞∞∞∞∞∞∞Page 226
Feb 01/05R CES
1_ If the fault continues:
- do a check and repair the wiring of the FREQ FUNCT SELECT
DATA INP A bus from the DME interrogator 2 (2SD2) to the
first terminal block (Ref. ASM 34-51/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-51-00∞∞∞∞∞∞∞∞∞∞Page 227
Feb 01/05R
CES Loss of the DME 2 Data on the ND
1. Possible Causes
_______________
- INTRG-DME, 2 (2SD2)
- ANTENNA-DME, 2 (3SD2)
- wiring from the DME antenna 2 (3SD2) to the DME interrogator 2 (2SD2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-51-00-720-001 Functional Test of the DME
AMM 34-51-00-740-002 BITE Test of the DME
AMM 34-51-11-000-002 Removal of the DME Antenna (3SD1, 3SD2)
AMM 34-51-11-400-002 Installation of the DME Antenna (3SD1, 3SD2)
AMM 34-51-33-000-001 Removal of the DME Interrogator (2SD1,2SD2)
AMM 34-51-33-400-001 Installation of the DME Interrogator (2SD1,2SD2)
ASM 34-51/01
3. Fault Confirmation
__________________
A. Test
(1) Do the functional test of the DME (Ref. AMM TASK 34-51-00-720-001).
4. Fault Isolation
_______________
A. If the DME 2 data do not come into view on the ND:
- do the BITE test of the DME (Ref. AMM TASK 34-51-00-740-002).
(1) If the test gives a maintenance message: R - Do the trouble shooting procedure related to the maintenance R message. R
(2) If the test does not give a maintenance message:
- replace the INTRG-DME, 2 (2SD2) (Ref. AMM TASK 34-51-33-000-001) and (Ref. AMM TASK 34-51-33-400-001).
(a) If the fault continues:
- replace the ANTENNA-DME, 2 (3SD2) (Ref. AMM TASK 34-51-11-000-002) and (Ref. AMM TASK 34-51-11-400-002).
1 If the fault continues:
_
- do a check and repair the wiring from the DME antenna 2 (3SD2) to the DME interrogator 2 (2SD2) (Ref. ASM 34-51/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-51-00∞∞∞∞∞∞∞∞∞∞Page 229
Feb 01/05R
CES DME 1 System Inoperative
1. Possible Causes
_______________
- INTRG-DME, 1 (2SD1)
- DMC-1 (1WT1)
- DMC-3 (1WT3)
- DMC-2 (1WT2)
- wiring of the DISTANCE DATA OUTPUT 2 bus from the DME interrogator 1 (2SD1) to the first terminal block
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(98)