• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-28 22:58来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 - do the Interface test of the IR (system 1) (Ref. AMM TASK 34-14-00-740-001).
 (a) If the Interface test of the IR (system 1) gives a maintenance message related to a FMGC2 failure:
 - replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the FMGC OWN CB 1 bus from the FMGC 2 (1CA2) to the first terminal block (Ref. ASM 22-86/02).
 (b) If the Interface test of the IR (system 1) does not give a maintenance message related to a FMGC2 failure:
 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the DATA FROM FMGC bus from the COM/NAV FREQ SEL RMP 2 (1RG2) to the first terminal block (Ref. ASM 23-13/01).
 (2) If the test gives again the maintenance message
 FMGC2(1CA2)/RMP2(1RG2)/ADF2/ (2RP2):

 - do the BITE test of the VOR/MKR (Ref. AMM TASK 34-55-00-740-002).
 (a) If the BITE test gives a maintenance message related to a RMP failure:
 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the NAV FREQ DATA OUTPUT bus from the COM/NAV FREQ SEL RMP 2 (1RG2) the first terminal block (Ref. ASM 34-53/01).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-53-00∞∞∞∞∞∞∞∞∞∞Page 228
 May 01/05 CES


 (b) If the BITE test does not give a maintenance message related to a RMP failure:
 - replace the RECEIVER-ADF, 2 (2RP2) (Ref. AMM TASK 34-53-31-000-002) and (Ref. AMM TASK 34-53-31-400-002).
 1 If the fault continues:
_
 - do a check and repair the wiring of the FREQUENCY CONTROL PORT A bus from the ADF receiver 2 (2RP2) to the first terminal block (Ref. ASM 34-53/01).
R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
 A. If the test gives the maintenance message ADF2 : NO DATA FROM CONTROL SOURCE: - on the center pedestal, on the RMP 2, push the NAV and the ADF
 pushbutton switches (the green LED on these pushbutton switches comes on).
 - do the BITE test of the ADF (Ref. AMM TASK 34-53-00-740-003).
 (1) If the test does not give the maintenance message ADF2 : NO DATA FROM CONTROL SOURCE:
 - do the Interface test of the IR (system 1) (Ref. AMM TASK 34-14-00-740-001).
 (a) If the Interface test of the IR (system 1) gives a maintenance message related to a FMGC2 failure:
 - replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the FMGC OWN CB 1 bus from the FMGC 2 (1CA2) to the first terminal block (Ref. ASM 22-86/02).
 (b) If the Interface test of the IR (system 1) does not give a maintenance message related to a FMGC2 failure:
 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the DATA FROM FMGC bus from the COM/NAV FREQ SEL RMP 2 (1RG2) to the first terminal block (Ref. ASM 23-13/01).


 (2) If the test gives again the maintenance message ADF2 : NO DATA FROM CONTROL SOURCE:
 - do the BITE test of the VOR/MKR (Ref. AMM TASK 34-55-00-740-002).
 (a) If the BITE test gives a maintenance message related to a RMP failure:

 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).

 (b) If the BITE test does not give a maintenance message related to a RMP failure:


 1_ If the fault continues:
 - do a check and repair the wiring of the NAV FREQ DATA OUTPUT
 bus from the COM/NAV FREQ SEL RMP 2 (1RG2) the first
 terminal block (Ref. ASM 34-53/01).

 - replace the RECEIVER-ADF, 2 (2RP2) (Ref. AMM TASK 34-53-31-000-002) and (Ref. AMM TASK 34-53-31-400-002).
 1 If the fault continues:
_
 - do a check and repair the wiring of the FREQUENCY CONTROL PORT A bus from the ADF receiver 2 (2RP2) to the first terminal block (Ref. ASM 34-53/01).
 **ON A/C ALL
 B. Do the test given in Para. 3.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-53-00∞∞∞∞∞∞∞∞∞∞Page 230
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(131)