• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-28 22:58来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 - replace the RECEIVER-VOR/MKR, 1 (3RS1) (Ref. AMM TASK 34-55-31-000-001) and (Ref. AMM TASK 34-55-31-400-001).

 (3) If the flag comes into view only on the RMI:

 


 1_ If the fault continues:
 - do a check and repair the wiring of the OMNI BEARING OUTPUT2
 bus from the VOR/MARKER 1 receiver (3RS1) to the first
 terminal block (Ref. ASM 34-57/01).

 - replace the RMI-VOR/ADF/DME (21FN) (Ref. AMM TASK 34-57-22-000-002) and (Ref. AMM TASK 34-57-22-400-002).
 (a) If the fault continues:
 - do a check and repair the wiring of the VOR1 bus from the VOR/ADF/DME RMI (21FN) to the first terminal block (Ref. ASM 34-57/01).
 **ON A/C ALL
 B. Do the test given in Para. 3.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-57-00∞∞∞∞∞∞∞∞∞∞Page 207
 May 01/05R
 CES


 TASK 34-57-00-810-805
 Loss of the VOR2 Data on the RMI
 1. Possible Causes_______________
R R R  - RECEIVER-VOR/MKR, 2 (3RS2) - RMI-VOR/DME (11FN) - RMI-VOR/ADF/DME (21FN) - wiring of the OMNI BEARING OUTPUT 2 bus from the VOR/MARKER 2 receiver (3RS2) to the first terminal block - wiring of the VOR2 bus from the VOR/DME RMI (11FN) to the first terminal block - wiring of the VOR2 bus from the VOR/ADF/DME RMI (21FN) to the first terminal block
 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R  34-55-00-810-814 AMM 34-55-00-720-001 AMM 34-55-00-740-002 AMM 34-55-31-000-001 AMM 34-55-31-400-001 AMM 34-57-22-000-001 AMM 34-57-22-000-002 AMM 34-57-22-400-001 AMM 34-57-22-400-002 ASM 34-57/01 Loss of the VOR 2 Data on the NDFunctional Test of the VOR/MKRBITE Test of the VOR/MKRRemoval of the VOR/MKR Receiver (3RS1, 3RS2)Installation of the VOR/MKR Receiver (3RS1, 3RS2)Removal of the VOR/DME RMI (11FN) Removal of the VOR/ADF/DME RMI (21FN)Installation of the VOR/DME RMI (11FN) Installation of the VOR/ADF/DME RMI (21FN)
 3. Fault Confirmation__________________
 A. Test Do the functional test of the VOR/MKR (test of the VOR reception and identification) (Ref. AMM TASK 34-55-00-720-001).

 

 4. Fault Isolation
_______________
 **ON A/C 001-049, 051-099, 101-105, 151-199,
 A. If during the test, the VOR2 pointer stays in the 3 o'clock position on the RMI:
 - make sure that the red flag comes into view on the RMI and on the ND.
 (1) If no flag comes into view on the RMI and on the ND:

 - refer to the trouble shooting procedure (Ref. TASK 34-55-00-810-814).

 (2) If the flag comes into view on the RMI and on the ND:


 - do the BITE test of the VOR/MKR (Ref. AMM TASK 34-55-00-740-002).
 (a) If the BITE test gives a maintenance message:

 - Do the trouble shooting procedure related to the maintenance message.

 (b) If the BITE test does not gives a maintenance message:


 - replace the RECEIVER-VOR/MKR, 2 (3RS2) (Ref. AMM TASK 34-55-31-000-001) and (Ref. AMM TASK 34-55-31-400-001).
 1 If the fault continues:
_
 - do a check and repair the wiring of the OMNI BEARING OUTPUT2 bus from the VOR/MARKER 2 receiver (3RS2) to the first terminal block (Ref. ASM 34-57/01).
 (3) If the flag comes into view only on the RMI:
 - replace the RMI-VOR/DME (11FN) (Ref. AMM TASK 34-57-22-000-001) and (Ref. AMM TASK 34-57-22-400-001).
 (a) If the fault continues:
 - do a check and repair the wiring of the VOR2 bus from the VOR/DME RMI (11FN) to the first terminal block (Ref. ASM 34-57/01).
R **ON A/C 106-149, 201-299, 301-399, 401-499,
 A. If during the test, the VOR2 pointer stays in the 3 o'clock position on the RMI:
 - make sure that the red flag comes into view on the RMI and on the ND.
 (1) If no flag comes into view on the RMI and on the ND:

 - refer to the trouble shooting procedure (Ref. TASK 34-55-00-810-814).

 (2) If the flag comes into view on the RMI and on the ND:

 - do the BITE test of the VOR/MKR (Ref. AMM TASK 34-55-00-740-002).
 (a) If the BITE test gives a maintenance message:

 - Do the trouble shooting procedure related to the maintenance message.

 (b) If the BITE test does not gives a maintenance message:


 - replace the RECEIVER-VOR/MKR, 2 (3RS2) (Ref. AMM TASK 34-55-31-000-001) and (Ref. AMM TASK 34-55-31-400-001).


 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(163)