R **ON A/C 106-149, 201-299, 301-399, 401-499,
TASK 34-57-00-810-812
Reception of the HDG Data on the VOR/ADF/DME RMI Inoperative
1. Possible Causes
_______________
- RMI-VOR/ADF/DME (21FN)
- ADIRU-1 (1FP1)
- ADIRU-3 (1FP3)
- wiring of the OUTPUT BUS 2 bus from the ADIRU1 (1FP1) to the VOR/ADF/DME RMI (21FN)
- wiring of the OUTPUT BUS 2 bus from the ADIRU3 (1FP3) to the VOR/ADF/DME RMI (21FN)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-14-00-740-001 Interface Test of the IR
AMM 34-57-22-000-002 Removal of the VOR/ADF/DME RMI (21FN)
AMM 34-57-22-400-002 Installation of the VOR/ADF/DME RMI (21FN)
ASM 34-57/01
3. Fault Confirmation
__________________
A. Test
(1) Do the Interface test of the IR (Ref. AMM TASK 34-14-00-740-001).
4. Fault Isolation
_______________
A. If during the test, the HDG flag comes into view on the VOR/ADF/DME RMI:
- do a check of the position of the ATT/HDG selector switch on the SWITCHING panel 8VU.
(1) If the ATT/HDG selector switch is at NORM or F/O 3:
- replace the RMI-VOR/ADF/DME (21FN) (Ref. AMM TASK 34-57-22-000-002) and (Ref. AMM TASK 34-57-22-400-002).
(a) If the fault continues:
- replace the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 201-299, 301-399, 401-499, ∞∞34-57-00∞∞∞∞∞∞∞∞∞∞Page 223
Aug 01/05 CES (2) If the ATT/HDG selector switch is at CAPT 3:
1_ If the fault continues:
- do a check and repair the wiring of the OUTPUT BUS 2 bus
from the ADIRU1 (1FP1) to the VOR/ADF/DME RMI (21FN) (Ref.
ASM 34-57/01).
- replace the RMI-VOR/ADF/DME (21FN) (Ref. AMM TASK 34-57-22-000-002) and (Ref. AMM TASK 34-57-22-400-002).
(a) If the fault continues:
- replace the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
1 If the fault continues:
_
- do a check and repair the wiring of the OUTPUT BUS 2 bus from the ADIRU3 (1FP3) to the VOR/ADF/DME RMI (21FN) (Ref. ASM 34-57/01).
B. Do the test given in Para. 3.
R **ON A/C 001-049, 051-099, 101-105, 151-199,
TASK 34-57-00-810-813
Loss of the Heading Data on the VOR/DME RMI
1. Possible Causes
_______________
- RMI-VOR/DME (11FN)
- SEL SW-ATT HDG (13FP)
- wiring from the ATT HDG selector switch (13FP) to the VOR/DME RMI (11FN)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-14-00-740-001 Interface Test of the IR
AMM 34-57-22-000-001 Removal of the VOR/DME RMI (11FN)
AMM 34-57-22-400-001 Installation of the VOR/DME RMI (11FN)
ASM 34-57/01
3. Fault Confirmation
__________________
A. Test
(1) Do the Interface test of the IR (Ref. AMM TASK 34-14-00-740-001).
4. Fault Isolation
_______________
A. If during the test, with the ATT HDG selector switch at CAPT 3, the HDG data do not come into view on the VOR/DME RMI:
- do a check for a maintenance message in the BITE test of the IR system.
(1) If the BITE test gives a maintenance message:
- Do the trouble shooting procedure related to the maintenance message.
(2) If the BITE test does not give a maintenance message:
- replace the SEL SW-ATT HDG (13FP).
(a) If the fault continues:
- do a check of the wiring from the ATT HDG selector switch (13FP) to the VOR/DME RMI (11FN): pin A/1 to pin A/J (Ref. ASM 34-57/01).
1 If there is no continuity:
_ - repair the above wiring.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(168)