- do a check and repair the wiring of the RA2 INPUT bus from the DMC2 (1WT2) to the first terminal block (Ref. ASM 34-42/02).
(b) If the radio altitude indication is not shown:
- replace the XCVR-RA, 2 (2SA2) (Ref. AMM TASK 34-42-33-000-001) and (Ref. AMM TASK 34-42-33-400-001).
1_ If the fault continues:
- do a check and repair the wiring of the ALTITUDE BUS 2 from
the RA transceiver 2 (2SA2) to the first terminal block
(Ref. ASM 34-42/02).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-42-00∞∞∞∞∞∞∞∞∞∞Page 249
Feb 01/05R
CES Loss of the CFDIU Input Bus on the RA1
1. Possible Causes
_______________
- XCVR-RA, 1 (2SA1)
- wiring of the MAINTENANCE DATA INPUT bus from the RA transceiver 1 (2SA1) to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-42-00-740-002 BITE Test of the Radio Altimeter AMM 34-42-33-000-001 Removal of the Radio Altimeter Transceiver 2SA1 and 2SA2 AMM 34-42-33-400-001 Installation of the Radio Altimeter Transceiver 2SA1 and 2SA2 ASM 34-42/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the radio altimeter (Ref. AMM TASK 34-42-00-740-002).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message RADIO ALTM 1 NO DATA FROM CFDIU:
- replace the XCVR-RA, 1 (2SA1) (Ref. AMM TASK 34-42-33-000-001) and (Ref. AMM TASK 34-42-33-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the MAINTENANCE DATA INPUT bus from the RA transceiver 1 (2SA1) to the first terminal block (Ref. ASM 34-42/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞34-42-00∞∞∞∞∞∞∞∞∞∞Page 250
Feb 01/05 CES Loss of the CFDIU Input Bus on the RA2
1. Possible Causes
_______________
- XCVR-RA, 2 (2SA2)
- wiring of the MAINTENANCE DATA INPUT bus from the RA transceiver 2 (2SA2) to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-42-00-740-002 BITE Test of the Radio Altimeter AMM 34-42-33-000-001 Removal of the Radio Altimeter Transceiver 2SA1 and 2SA2 AMM 34-42-33-400-001 Installation of the Radio Altimeter Transceiver 2SA1 and 2SA2 ASM 34-42/02
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the radio altimeter (Ref. AMM TASK 34-42-00-740-002).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message RADIO ALTM 2 NO DATA FROM CFDIU:
- replace the XCVR-RA, 2 (2SA2) (Ref. AMM TASK 34-42-33-000-001) and (Ref. AMM TASK 34-42-33-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the MAINTENANCE DATA INPUT bus from the RA transceiver 2 (2SA2) to the first terminal block (Ref. ASM 34-42/02).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞34-42-00∞∞∞∞∞∞∞∞∞∞Page 251
Feb 01/05 CES Loss of the Interface between the Weather Radar Transceiver 1 and the Radio Altimeter Transceiver 1
1. Possible Causes
_______________
- XCVR-RA, 1 (2SA1)
- XCVR-WEATHER RADAR, 1 (1SQ1)
- wiring from the radio altimeter transceiver 1 to the weather radar
transceiver 1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(44)
