2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-43-00-740-001 BITE Test of the TCAS
AMM 34-43-11-000-001 Removal of the TCAS Antenna (7SG1, 7SG2)
AMM 34-43-11-400-001 Installation of the TCAS Antenna (7SG1, 7SG2)
AMM 34-43-34-000-001 Removal of the TCAS Computer (1SG)
AMM 34-43-34-400-001 Installation of the TCAS Computer (1SG)
ASM 34-43/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the TCAS (Ref. AMM TASK 34-43-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message TCAS BOT ANTENNA (7SG2): COAXIAL J4:
- do a check of the coaxial cable J4 from the bottom antenna (7SG2) to the TCAS computer (1SG) (Ref. ASM 34-43/01).
(1) If there is no continuity:
- repair the related coaxial cable.
(2) If there is continuity:
- make sure that there is discontinuity between the core and the shield of the coaxial cable.
(a) If there is continuity:
- repair the related coaxial cable.
(b) If there is no continuity:
- replace the CMPTR-TCAS (1SG) (Ref. AMM TASK 34-43-34-000-001) and (Ref. AMM TASK 34-43-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-43-00∞∞∞∞∞∞∞∞∞∞Page 231
Aug 01/05R CES
1 If the fault continues:
_
- replace the ANTENNA-TCAS, BOTTOM (7SG2) (Ref. AMM TASK 34-43-11-000-001) and (Ref. AMM TASK 34-43-11-400-001).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-43-00∞∞∞∞∞∞∞∞∞∞Page 232
Aug 01/05R
CES
R
TASK 34-43-00-810-817
1. Possible Causes
R Loss of the RA1 Data to the TCAS _______________
- CMPTR-TCAS (1SG)
- wiring of the RADIO ALTITUDE 1 bus from the TCAS computer (1SG) to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-43-00-740-001 BITE Test of the TCAS
AMM 34-43-34-000-001 Removal of the TCAS Computer (1SG)
AMM 34-43-34-400-001 Installation of the TCAS Computer (1SG)
ASM 34-43/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the TCAS (Ref. AMM TASK 34-43-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message RA1 (1SA1)/TCAS (1SG):
- replace the CMPTR-TCAS (1SG) (Ref. AMM TASK 34-43-34-000-001) and (Ref. AMM TASK 34-43-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the RADIO ALTITUDE 1 bus from the TCAS computer (1SG) to the first terminal block (Ref. ASM 34-43/01).
B. Do the test given in Para. 3.
R Loss of the RA2 Data to the TCAS
1. Possible Causes
_______________
- CMPTR-TCAS (1SG)
- wiring of the RADIO ALTITUDE 2 bus from the TCAS computer (1SG) to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-43-00-740-001 BITE Test of the TCAS
AMM 34-43-34-000-001 Removal of the TCAS Computer (1SG)
AMM 34-43-34-400-001 Installation of the TCAS Computer (1SG)
ASM 34-43/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the TCAS (Ref. AMM TASK 34-43-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message RA2 (1SA2)/TCAS (1SG):
- replace the CMPTR-TCAS (1SG) (Ref. AMM TASK 34-43-34-000-001) and (Ref. AMM TASK 34-43-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the RADIO ALTITUDE 2 bus from the TCAS computer (1SG) to the first terminal block (Ref. ASM 34-43/01).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(58)
