• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-28 22:58来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R - repair the above wiring.

R b_ If there is continuity:
R - do a check and repair the wiring of the W/R SELECTED
R discrete from the DMC2 (1WT2) to first terminal block
R (Ref. ASM 34-41/01).

R (b) If the weather radar display is not correctly shown on the F/O ND
R with the EIS DMC selector switch at F/O 3:
R - replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and
R (Ref. AMM TASK 31-63-34-400-001).

R 1_ If the fault continues:
R - do a check and repair the wiring from the DMC2 (1WT2) to the
R F/O ND (3WT2):

R . from pins AB/12B, 12C to pins AA/13, 14

R . from pins AB/12H, 12J to pins AA/40, 41

R . from pins AB/13B, 13C to pins AA/28, 29

R . from pins AB/13H, 13J to pins AA/26, 27 R (Ref. ASM 31-61/04).


R (2) If the weather radar system 2 is set:
R - on the center pedestal, on the SWITCHING panel 8VU, set the EIS DMC
R selector switch to F/O/3, and make sure that the weather radar
R display is correctly shown on the F/O ND.

R (a) If the weather radar display is correctly shown on the F/O ND
R with the EIS DMC selector switch at F/O/3:
R - replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and
R (Ref. AMM TASK 31-63-34-400-001).

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 051-099, ∞∞34-41-00∞∞∞∞∞∞∞∞∞∞Page 207
 May 01/05 CES


R 1_ If the weather radar display is still incorrectly shown on the
R F/O ND with the EIS DMC selector switch at NORM:
R - do a check of the wiring of the WR2 INPUT 1 and the WR2
R INPUT 2 buses from the DMC2 (1WT2) to the first terminal
R block (Ref. ASM 34-41/01).

R a_ If there is no continuity:
R - repair the above wiring.

R b_ If there is continuity:
R - do a check and repair the wiring of the W/R SELECTED
R discrete from the DMC2 (1WT2) to the first terminal block
R (Ref. ASM 34-41/01).

R (b) If the weather radar display is not correctly shown on the F/O ND
R with the EIS DMC selector switch at F/O 3:
R - replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and
R (Ref. AMM TASK 31-63-34-400-001).

R 1_ If the fault continues:
R - do a check and repair the wiring from the DMC2 (1WT2) to the
R F/O ND (3WT2):

R . from pins AB/12B, 12C to pins AA/13, 14

R . from pins AB/12H, 12J to pins AA/40, 41

R . from pins AB/13B, 13C to pins AA/28, 29

R . from pins AB/13H, 13J to pins AA/26, 27 R (Ref. ASM 31-61/04).


R C. If the weather radar display is not shown or incorrectly shown on the two
R NDs:
R - do the BITE test of the weather radar (Ref. AMM TASK 34-41-00-740-002).

R NOTE : In case of incorrect avionics ventilation, the radar images are

____ R not shown to prevent overheat of NDs.
R (1) If the test gives a maintenance message:
R - you can find the related trouble shooting procedure in the
R applicable Page Block 101.

R (2) If the test does not give a maintenance message:
R - on the weather radar control unit (3SQ), do a check of the position
R of the system selector switch.

R (a) If the weather radar system 1 is set:
R - replace the XCVR-WEATHER RADAR, 1 (1SQ1) (Ref. AMM TASK 34-41-R 33-000-004) and (Ref. AMM TASK 34-41-33-400-003).

R 1_ If the fault continues:
R - do a check of the wiring of the TR1 DATA BUS 1 OUTPUT and
R the TR1 DATA BUS 2 OUTPUT buses from the weather radar
R transceiver 1 (1SQ1) to the first terminal block (Ref. ASM
R 34-41/01).

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 051-099, ∞∞34-41-00∞∞∞∞∞∞∞∞∞∞Page 208
 May 01/05 CES


R a_ If there is no continuity:
R - repair the above wiring.

R b_ If there is continuity:
R - do a check of the wiring of the weather radar control
R unit (3SQ):

R . from pin A/G to the first terminal block


R . from pin A/A to the ground point


R . from pins A/K, L, M to the weather radar transceiver 1
R (1SQ1), pins AB/6C, 6D, 7D


R . from pin A/V to the weather radar transceiver 1 (1SQ1),
R pin AB/6B
R (Ref. ASM 34-41/01).
R - If there is no continuity:


R . repair the above wiring.
R - If there is continuity:


R . do a check of the wiring of the weather radar
R transceiver mounting tray (9SQ) :
R * from pins A/A and A/E to the control unit (3SQ), pins
R A/D and A/E.
R * from pin A/F to the ground point.
R * from pin A/C to the weather radar transceiver 1 (1SQ1),
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(4)