(b) If the test is correct: - do a check and repair the wiring from the TCAS computer (1SG) to the ATC/Mode S transponder 2 (1SH2) (Ref. ASM 34-52/01).
R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
A. If the test gives the maintenance message TCAS (1SG)/ATC2 (1SH2): - replace the CMPTR-TCAS (1SG) (Ref. AMM TASK 34-43-34-000-001) and (Ref. AMM TASK 34-43-34-400-001).
R R R (1) If the fault continues: - do the functional test of the ATC2 (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005).
(a) If the test is incorrect: - replace the XPDR-ATC/MODE S, 2 (1SH2) (Ref. AMM TASK 34-52-33-000-001) and (Ref. AMM TASK 34-52-33-400-001).
(b) If the test is correct: - do a check and repair the wiring from the TCAS computer (1SG) to the ATC/Mode S transponder 2 (1SH2) (Ref. ASM 34-52/01).
**ON A/C ALL
B. Do the test given in Para. 3.
R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
TASK 34-52-00-810-824
Loss of the FMGC1 Data Input to the ATC/Mode S Transponder 1
1. Possible Causes
_______________
- FMGC-1 (1CA1)
- XPDR-ATC/MODE S, 1 (1SH1)
- wiring from the FMGC1 (1CA1) to the ATC/Mode S transponder 1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-52-00-740-004 BITE Test of the ATC
AMM 34-52-33-000-001 Removal of the ATC/Mode S Transponder (1SH1, 1SH2)
AMM 34-52-33-400-001 Installation of the ATC/Mode S Transponder
(1SH1,1SH2)
ASM 34-52/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the ATC (Ref. AMM TASK 34-52-00-740-004).
4. Fault Isolation
_______________
A. If the test gives the maintenance message FMGC (1CA1)/ATC1 (1SH1):
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(1) If the fault continues:
- replace the XPDR-ATC/MODE S, 1 (1SH1) (Ref. AMM TASK 34-52-33-000-001) and (Ref. AMM TASK 34-52-33-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FMGC1 (1CA1) to the ATC/Mode S transponder 1 for the FMGC Flight Identification bus (Ref. ASM 34-52/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 051-099, 106-149, 201-299, 301-399, ∞∞34-52-00∞∞∞∞∞∞∞∞∞∞Page 238
401-499, Aug 01/05 CES
TASK 34-52-00-810-825
Loss of the FMGC2 Data Input to the ATC/Mode S Transponder 2
1. Possible Causes
_______________
- FMGC-2 (1CA2)
- XPDR-ATC/MODE S, 2 (1SH2)
- wiring from the FMGC2 (1CA2) to the ATC/Mode S transponder 2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-52-00-740-004 BITE Test of the ATC
AMM 34-52-33-000-001 Removal of the ATC/Mode S Transponder (1SH1, 1SH2)
AMM 34-52-33-400-001 Installation of the ATC/Mode S Transponder
(1SH1,1SH2)
ASM 34-52/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the ATC (Ref. AMM TASK 34-52-00-740-004).
4. Fault Isolation
_______________
A. If the test gives the maintenance message FMGC (1CA2)/ATC2 (1SH2):
- replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 3(118)
