1. Possible Causes
_______________
- PRINTER (4TW)
- EVMU (2EV)
- MCDU-1 (3CA1)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-82-12-000-001 Removal of the MCDU (3CA1,3CA2,3CA3)
AMM 22-82-12-400-002 Installation of the MCDU (3CA1,3CA2,3CA3)
AMM 31-35-22-000-001 Removal of the Printer (4TW)
AMM 31-35-22-400-001 Installation of the Printer (4TW)
AMM 77-32-34-000-040 Removal of the Monitoring Unit Engine Vibration
(EVMU) (2EV) AMM 77-32-34-400-040 Installation of the Vibration Monitoring Unit (EVMU) ASM 22-86/04 ASM 31-35/01
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 121VU PTR/SPLY 6TW J21 121VU CFDS/CFDIU/SPLY 2TW J18
R 121VU ENGINE/ENG1 AND 2/EVMU 1EV R44
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-35-00∞∞∞∞∞∞∞∞∞∞Page 224
Feb 01/05 CESR **ON A/C ALL
B. Test
On the MCDU1:
- get the EVMU page on the MCDU MENU and then push the line key adjacent to the PRINT indication.
4. Fault Isolation
_______________
A. If it is not possible to print the EVMU data on the printer (4TW):
- replace the PRINTER (4TW) (Ref. AMM TASK 31-35-22-000-001) and (Ref. AMM TASK 31-35-22-400-001).
(1) If the fault continues:
- replace the EVMU (2EV) (Ref. AMM TASK 77-32-34-000-040) and (Ref. AMM TASK 77-32-34-400-040).
(a) If the fault continues:
- do a check of the wiring from EVMU (1EV) pins AA/13A, 13C to printer (4TW) pins A/j, X (Ref. ASM 31-35/01).
1 If there is no continuity:
_ - repair the wiring.
2 If there is continuity:
_
- do a check of the wiring from MCDU1 (3CA1) pins A/27, 28 to CFDIU (1TW) pins AB/3H, 3J (Ref. ASM 22-86/04).
a If there is no continuity:
_ - repair the wiring.
b If there is continuity:
_
- replace the MCDU-1 (3CA1) (Ref. AMM TASK 22-82-12-000-001) and (Ref. AMM TASK 22-82-12-400-002).
B. Do the action given in Para. 3.B.
Printing of the FMGC1 Data not possible from the MCDU2
1. Possible Causes
_______________
- PRINTER (4TW)
- FMGC-1 (1CA1)
- MCDU-2 (3CA2)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-82-12-000-001 Removal of the MCDU (3CA1,3CA2,3CA3)
AMM 22-82-12-400-002 Installation of the MCDU (3CA1,3CA2,3CA3)
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 31-35-22-000-001 Removal of the Printer (4TW)
AMM 31-35-22-400-001 Installation of the Printer (4TW)
ASM 22-86/04
ASM 31-35/01
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FMGC/1 10CA1 B02 121VU PTR/SPLY 6TW J21 121VU CFDS/CFDIU/SPLY 2TW J18
R 121VU AUTO FLT/MCDU/2 11CA2 N20
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-35-00∞∞∞∞∞∞∞∞∞∞Page 226
Feb 01/05 CES
R **ON A/C ALL
B. Test 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320 Trouble Shooting Manual 排故手册 指示和记录系统 1(74)
