(3) If the fault continues:
- replace the FDIMU (10TV) (Ref. AMM TASK 31-36-34-000-002) and (Ref. AMM TASK 31-36-34-400-002).
B. Do the test given in para. 3.
TASK 31-36-00-810-919
FDIMU receives no data from the BSCU 1 or BSCU 2 (10GG)
1. Possible Causes
_______________
- BSCU (10GG)
- DMU/FDIU (FDIMU) (10TV)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-36-00-740-012 Test of the FDIMU (10TV)
AMM 31-36-34-000-002 Removal of the FDIU/DMU (FDIMU) (10TV)
AMM 31-36-34-400-002 Installation of the FDIU/DMU (FDIMU) (10TV)
AMM 32-42-00-710-001 Operational Check of the Normal Braking System
ASM 31-37/01
3. Fault Confirmation
__________________
A. Do the FDIMU (10TV) fault monitoring test (AIDS-part) (Ref. AMM TASK 31-36-00-740-012).
NOTE : Make sure that the circuit breakers 5TV, 5CC2, 14CC2 on the panel
____ 121VU and 5CC1, 14CC1 on the panel 49VU are closed during the test.
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
- BSCU1 (10GG) / FDIMU (10TV)
- BSCU2 (10GG) / FDIMU (10TV)
(1) Do the operational test of the Normal Braking System (Ref. AMM TASK 32-42-00-710-001).
(a) If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
(2) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG) to the DMU/FDIU (FDIMU) (10TV) (Ref. ASM 31-37/01).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 211-299, 301-399, 401-499, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page A210
Aug 01/05 CES (3) If the fault continues:
- replace the FDIMU (10TV) (Ref. AMM TASK 31-36-34-000-002) and (Ref. AMM TASK 31-36-34-400-002).
B. Do the test given in para. 3.
AIDS INTERCONNECTION ((FDIMU, DAR)) - TASK SUPPORTING DATA__________________________________________________________
R 1. General_______
R
R The block diagrams that follow give you a logical view of the
system/sub-system to help you do the related trouble shooting procedures.
R
AIDS System Block Diagram
Figure 301
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 302
May 01/05 CES
AIDS System Block Diagram
Figure 301A
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 211-299, 301-399, 401-499, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 303
Aug 01/05 CES
AIDS System Block Diagram R Figure 301B
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 151-199, 201-210, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 304
May 01/05 CES
R UP AND DOWN DATA LOADING SYSTEM ACQUISITION/INTERFACE AND EQUIPMENT (DLRB, DLS)_______________________________________________________________________________ FAULT ISOLATION PROCEDURES
__________________________
TASK 31-38-00-810-801
Internal Failure of the Data Loading Routing Box
1. Possible Causes
_______________
- ROUTING BOX-DATA LOADING (102TD)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 指示和记录系统 1(110)
