• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-25 18:01来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 

 Radial and Bias Tire Profiles Installed on same Wheel Axle
 Figure 201/TASK 32-41-00-991-029

 1EFF : ALL 1 32-41-00Page 203 1 1 May 01/04R 1 1 1CES 1


R  **ON A/C ALL
 Subtask 32-41-00-860-054
 B. Tire Mixing on the NLG
 NOTE : The mixing of bias tires with radial tires is not permitted on the____ NLG , because this can cause an unbalance condition.
R  (1) Radial tires - You can mix these radial tires : . Bridgestone P/N APR05140 and P/N APR05145 . Michelin P/N M04201 and P/N M08201 . Sumitomo P/N SR11261T, P/N SR11262T, P/N SR11263T.
 NOTE : : No other configurations of radial tire mixing are permitted____ on the NLG
 (2) Bias tires - You can mix these bias tires : . Michelin MATC P/N 039-539-0 and P/N 039-539-1.
 NOTE : : No other configurations of bias tire mixing are permitted on____ the NLG 

R 1EFF : ALL 1 32-41-00Page 204 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-41-00Page 401 1 1 May 01/05 1 1 1CES 1


 WHEELS - DEACTIVATION/REACTIVATION__________________________________
 TASK 32-41-00-040-001
 Nose Wheel Hubcap Deactivation
 1. Reason for the Job__________________
 Refer to the CDL TASK: 32-2 Main Wheel Hubcap
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R R  No specific No specific No specific No specific No specific  blanking cap circuit breaker(s) safety clip(s) temporary placardwarning noticewheel chocks 
R  B. Consumable Materials 
R R R  -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R  Material No. 04-004  USA MIL-PRF-23827 TYPE I SYNTH.ESTER BASED GREASE HIGH PRESSURE (Ref. 20-31-00) 
R  C. Expendable Parts 
R R R  -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R R R  6 7 8  seal plug nut cotter pin  32-49-15 01 -060 32-49-15 01 -020 32-49-15 01 -010

 

 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
12-14-32-614-001 Nitrogen Filling of the Tires
 32-49-17-000-001 Removal of the NLG TPIS Rotating Mechanism

R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-41-00-991-010 Fig. 401
 **ON A/C 051-099,
 32-41-00-991-010-A Fig. 401A
 **ON A/C ALL
 3. Job Set-up
__________ R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 32-41-00-941-052
 A. Safety Precautions
 (1) On the panel 400VU:
 -put a warning notice in position to tell persons not to operate the landing gear control lever.
 (2) Install the wheel chocks at the main landing gear.
 **ON A/C 051-099,

 Subtask 32-41-00-941-052-A
 A. Safety Precautions
 (1) On the panel 400VU:
 -put a warning notice in position to tell persons not to operate the landing gear control lever.
 1EFF : ALL 1 32-41-00Page 402 1 1 Aug 01/05 1 1 1CES 1


 (2)
 Install the wheel chocks at the main landing gear.

 (3)
 Fully deflate the tire on the related NLG wheel (Ref. TASK 12-14-32-614-001).


 Subtask 32-41-00-865-054
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU HYDRAULIC/TIRE/PRESS 1GV M31
 **ON A/C ALL
 4. Procedure
_________ R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 401/TASK 32-41-00-991-010)
 **ON A/C 051-099,

 (Ref. Fig. 401A/TASK 32-41-00-991-010-A) R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 32-41-00-040-051
 A. Deactivation of the Nose Wheel Hubcap
 (1)
 Cut and remove the corrosion resistant steel lockwire.

 (2)
 Remove the screws (2) and the washers (3).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架6(47)