(2)
Remove the cable-guide locking-devices (21) and the fairleads (22) for the related cable(s).
(3)
Remove the locking clips (24) from the turnbuckles (23).
(4)
Loosen the turnbuckles (23) for the cables (13) and (15) until the tension in the cables is released.
(5)
On the cable(s) to be removed, continue to loosen the turnbuckle(s)
(23) until the cable(s) is/are disconnected.
(6)
Temporarily attach the cable(s) (25) and/or (27) to the structure.
(7)
Remove the cotter pin(s) (14) for the cable(s) (13) and/or (15).
(8)
Release the cable(s) (13) and/or (15) from the pulley (16) and remove it/them from the aircraft.
Subtask 32-33-16-020-052
B. Removal of the MLG Free-Fall Extension Cables (25) and/or (27)
(Ref. Fig. 406/TASK 32-33-16-991-003)
(1)
Remove the applicable cable-guard items:
-
the nuts (20)
-
the bolts (18)
-
the spacers (19).
(2)
Remove the cable-guard(s) (17).
(3)
Remove the cable-guide locking-devices (21) and the fairleads (22) for the related cable.
1EFF : ALL 1 32-33-16Page 429 1 1 Feb 01/03R 1 1 1CES 1
(4)
For the cable (27) remove these items at the bracket (2) on FR 12:
-
the cotter pin (4)
-
the nut (5)
-
the washer (6)
-
the bolt (1)
-
the spacer (3).
(5)
Remove the locking clips (24) from the turnbuckles (23).
(6)
Loosen the turnbuckles (23) for the cables (25) and (27) until the tension in the cables is released.
(7)
On the cable(s) to be removed, continue to loosen the turnbuckle(s)
(23) until the cable(s) is/are disconnected.
(8)
Temporarily attach the cable(s) (13) and/or (15) to the structure.
(9)
Release the cable(s) (25) and/or (27) from the pulley (26) and remove it/them from the aircraft.
Subtask 32-33-16-020-053
C. Removal of the MLG Free-Fall Extension Cables (37) and/or (38)
(Ref. Fig. 407/TASK 32-33-16-991-004, 409/TASK 32-33-16-991-009)
(1)
At the cable pressure seals, remove and discard the locking wire for the bolts (62).
(2)
Remove these items from the applicable cable-pressure-seal(s):
-
the retaining ring (64)
-
the bolts (62)
-
the washers (61)
-
the swivel cable-guides (59).
(3)
At the cable pulley brackets remove these items:
-
the cotter pins (54) and (55)
-
the washers (53) and (56)
-
the tubes (52) and (57)
-
the nut (66), the washer (67) and the guide bolt (68).
(4)
Remove the locking clips (42).
(5)
Loosen the turnbuckles (41) for the cables (37) and (38) until the tension in the cables is released.
(6)
On the cable(s) to be removed, continue to loosen the turnbuckle(s)
(41) until the cable(s) is/are disconnected.
1EFF : ALL 1 32-33-16Page 430 1 1 Feb 01/03R 1 1 1CES 1
(7)
Temporarily attach the cable(s) (39) and/or (40) to the structure.
(8)
Release the cable(s) (37) and/or (38) from the pulley (65).
(9)
Remove the cable(s), the pressure-seal-flanges (58) and (60) and the sleeve (63).
Subtask 32-33-16-020-054
D. Removal of the MLG Free-Fall Extension Cables (39) and/or (40)
(Ref. Fig. 407/TASK 32-33-16-991-004, 408/TASK 32-33-16-991-005)
(1)
At the cable pulley assemblies:
(a)
Remove and discard the locking wire for the nuts (87).
(b)
Remove and discard the cotter pins (77), (80).
(c)
Remove these items:
-
the washers (76), (79) and the tubes (75), (78)
-
the nuts (87) and the washers (86)
-
the cable guard assembly (85)
-
the pins (84).
(2)
When necessary (for RH cables only) release the fairlead(s) (82) from the cover (81) and remove it/them from the cable(s).
(3)
Remove the locking clips (42).
(4)
Loosen the turnbuckles (41) for the cables (39) and (40) until the tension in the cables is released.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架6(25)
