• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-25 18:01来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 **ON A/C ALL
 Subtask 32-42-00-865-071
 D. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R  49VU L/G/Y BRK/PRESS/IND  61GG  C10 
R  **ON A/C 401-499, 
R  49VU ABCU &/Y BRK/PRESS IND  61GG  C10 
R  **ON A/C ALL 
R R R R R R R R  121VU HYDRAULIC/BRAKING AND STEERING/SYS2/SPLY 121VU HYDRAULIC/BRAKING AND STEERING/SYS2/CTL 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/CTL 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/IND AND/SPLY 121VU HYDRAULIC/PARK BRK/CTL/STBY 121VU HYDRAULIC/PARK BRK/CTL/NORM 121VU HYDRAULIC/HYD POWER/Y 123VU Y HYD/ELEC/PUMP  4GG 3GG 1GG 2GG 71GG 70GG 3803GX 3802GX  M36 M35 M34 M33 N37 N36 N30 AB06

 

 4. Procedure
_________
R  **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 32-1201 For A/C 001-049,101-105,151-154,201-207, Subtask 32-42-00-720-053
 A. Functional test of automatically reactivation of the normal braking mode
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
Push the left pedal of the Captain or First Officer side
Depressurize the auxilliary/parking brake system:
-In the right MLG compartment (zone 744), operate the manual depressurization button on the brake relief valve (3067 GM) to release the pressure.
 Push the left pedal on the Captain and First Officer side
Subtask 32-42-00-860-094On the brake units of the left maingear:
 -the pistons related to the Green hydraulic system are retracted and the pistons related to the Yellow hydraulic system are extended.
On the triple indicator (60GG), on thepanel 400VU:
-
make sure that the ACCU PRESSindicator shows zero pressure.

-
make sure that the MEMO "PARK ON"remains on the upper ECAM DU.


On the brake units of the left maingear:
 -the pistons related to the Green hydraulic system are extended and the pistons related to the Yellow hydraulic system are retracted.
 B. Aircraft Maintenance Configuration
 (1) Pressurize the brake accumulator system
 (a) On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch to pressurize the brake accumulator system to 206 bar (2987.7766 psi).
 1EFF : ALL 1 32-42-00Page 541 1 1 Aug 01/05 1 1 1CES 1


 (b)
 The brake accumulator pressure is shown on the ACCU PRESS indicator.

 (c)
 On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch.


 (2)
 Do the EIS stop procedure (Ref. TASK 31-60-00-860-002)

 (3)
 Depressurize the Green hydraulic system. (Ref. TASK 29-10-00-864-001).

 (4)
 De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).


 **ON A/C ALL
 5. Close-up
________
R  **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 32-1201 For A/C 001-049,101-105,151-154,201-207, Subtask 32-42-00-942-061
 A. Removal of Equipment
 (1)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (2)
 Remove the warning notice(s).


 (3) Remove the access platform(s).
 Subtask 32-42-00-410-051

 B. Close Access
 (1) Close the right MLG door (Ref. TASK 32-12-00-410-001).
 1EFF : ALL 1 32-42-00Page 542 1 1 Aug 01/05 1 1 1CES 1 SELECTOR VALVE - BRAKE (23GG) - REMOVAL/INSTALLATION

 

____________________________________________________
 TASK 32-42-11-000-001
 Removal of the Brake Selector Valve 23GG
 WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE. WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
 1. Reason for the Job__________________ Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架6(136)