-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
20.
Monitor the Fuel Quantity Indicator 6QT.
21.
Monitor the Fuel Quantity Indicator 6QT until approximately 400 kg (900 lb) of fuel has been moved.
22.
On the Fuel Control Panel 40VU:
-
release (out) the CTR TK PUMP 2 P/BSW
-
release (out) the applicable R TK PUMPS 1 or 2 P/BSW.
23.
On the Refuel/Defuel Panel 800VU:
-
set the REFUEL VALVE switches to NORM
-
set the MODE SELECT switch to OFF.
24.
On the Fuel Control Panel 40VU:
-release (out) the MODE SEL P/BSW.
5. Close-up
________ Subtask 28-21-00-860-072
A. Aircraft Configuration
-
the RIGHT value decreases
-
the CTR value increases.On the ECAM lower DU:
-
the CTR TK PUMP 2 symbol goes togreen in-line.
On the Fuel Control Panel 40VU:
-
the CTR TK PUMP 2 OFF light comes on
-
the applicable R TK PUMPS 1 or 2 OFFlight comes on.
On the Refuel/Defuel Panel 800VU:
-
the MODE SELECT OPEN light goes off.
On the Fuel Control Panel 40VU:
-
the MODE SEL MAN light comes on.
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001).
(3)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page A513 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(4) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-
002). Subtask 28-21-00-942-081
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page A514 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 TASK 28-21-00-720-004
Functional Test of the Center-Tank Fuel-Pump-Cannister Check-Valves
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
No specific container 1.0 l (0.2641 USgal)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 01-001 USA ASTM-D-1655-93 (JET A-1) FUEL, TURBO (Ref. 20-31-00) Material No. 04-012 USA VV-P-236 PURE MINERALVASELINE OR PETRO- LATUM (Ref. 20-31-00)
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page A515 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
1 sealing ring 28-21-51 01 -100
1 sealing ring 28-21-51 01 -100A
D. Referenced Information
------------------REFERENCE -------------------------------DESIGNATION ------------------------------
-------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油3(14)
