(2)
Put the access platform in position at the main landing-gear door.
1EFF : ALL 1 28-22-51Page 402 1 1 Aug 01/04 1 1 1CES 1 1EFF : ALL 1 28-22-51Page 403 1 1 Aug 01/02 1 1 1CES 1
4. Procedure_________
(Ref. Fig. 401/TASK 28-22-51-991-001, 402/TASK 28-22-51-991-002, 403/TASK 28-22-51-991-003, 404/TASK 28-22-51-991-004)
Subtask 28-22-51-020-052
A. Removal of the APU Fuel Pump (4QC)
R R NOTE : This removal procedure is applicable for the APU fuel pump with____ P/N C12CB0010
(1) Disconnect the electrical connector (2) from the APU fuel pump (1).
(2) Put blanking caps on the disconnected electrical connectors.
(3) Remove the four screws (3) from the APU fuel pump (1) which attach the pump to the canister (12).
R R (4) Remove the APU fuel pump (1) with the two screws (3) installed into the two extraction threads (4) as far as the security blockscrew (5) permits.
NOTE : You must use two screws, thread size 10-32 UNF 3B for the____ removal of the pump.
(5) Put a container in position below the APU fuel pump (1).
(6) Remove the drain plug (7) and drain the remaining fuel from the APU fuel pump (1).
(7) Remove and discard the O-ring (6) from the drain plug (7).
R R (8) Cut, remove and discard the lockwire and remove the screws (8) from the security plate (9).
(9) Remove the security plate (9) from the APU fuel pump (1).
(10) Turn the pump in a counterclockwise direction until the release slot is in line with the security blockscrew (5).
(11) Remove the APU fuel pump (1).
(12) Remove and discard the two O-rings (10) and (11) from the APU fuel pump (1).
R APU Fuel Pump (P/N C12CB0010)
R (with Canister (P/N C49AA0221))
Figure 401/TASK 28-22-51-991-001
1EFF : ALL 1 28-22-51 Page 404
1 1 Nov 01/01
1 1
1CES 1
R APU Fuel Pump (P/N C12CB0011/C12CB0012)
R (with Canister (P/N C49AA0221))
Figure 402/TASK 28-22-51-991-002
1EFF : ALL 1 28-22-51 Page 405
1 1 Nov 01/01
1 1
1CES 1
R APU Fuel Pump (P/N C12CB0010)
(with Canister (P/N C49AA0222))
Figure 403/TASK 28-22-51-991-003
1EFF : ALL 1 28-22-51 Page 406
1 1 Aug 01/02
1 1
1CES 1
R APU Fuel Pump (P/N C12CB0011/C12CB0012/C12CB0013)
(with Canister (P/N C49AA0222))
Figure 404/TASK 28-22-51-991-004
1EFF : ALL 1 28-22-51 Page 407
1 1 Feb 01/05
1 1
1CES 1
Subtask 28-22-51-020-054
B. Removal of the APU Fuel Pump (4QC) NOTE : This removal procedure is applicable for the APU fuel pump with
____ R P/N C12CB0011/C12CB0012/C12CB0013.
(1)
Disconnect the electrical connector (2) from the APU fuel pump (1).
(2)
Put blanking caps on the disconnected electrical connectors.
(3)
Remove the four screws (10) from the APU fuel pump (1) which attach the pump to the canister (6).
(4)
Remove the APU fuel pump (1) with two extraction screws, thread size 10-32 UNF 3B.
(a) Install the extraction screws into the two extraction threads (9) as far as the security blockscrew (5) permits.
(5)
Put a container in position below the APU fuel pump (1).
(6)
Remove the drain plug (3) and drain the remaining fuel from the APU fuel pump (1).
(7)
Remove and discard the packing (4) from the drain plug (3).
(8)
Turn the pump in a counterclockwise direction until the release slot is in line with the security blockscrew (5).
(9)
Remove the APU fuel pump (1).
(10) Remove and discard the two packings (7) and (8) from the APU fuel pump (1).
1EFF : ALL 1 28-22-51Page 408 1 1 Feb 01/05 1 1 1CES 1 TASK 28-22-51-400-001
Installation of the APU Fuel Pump (4QC)
WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油3(128)
