曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Installation
Wire and cable repair
Day 2 Electrical Connectors
Soldering, connector types / characteristics
Connector Tools
Crimping terminals and splices
Terminal blocks / modules, bonding
Grounding, use of meters, co-ax testing
Day 3
Practical exercise – Soldering
Practical exercise – Crimping
Day 4
How to use the Airbus WDM
Charts and Lists
Methods used to find information
Practical exercise 1 – B737 or B747
Practical exercise 2 – B737 or B747
Day 5
Practical exercise – Airbus wiring
Continuity and insulation testing
Day 6
How to use the Boeing AWM
Charts and lists
Wiring diagram, schematic Manual, ESPM
Practical exercise 1 – A320 or A340
Practical exercise 2 – A320 or A340
Day 7
Practical exercise – Boeing Wiring
Continuity and insulation testing
858.458.0223 sales@ProgrammablePower.com
The Elgar SmartWave™ (SW) Series of AC
power sources offers powerful waveform
creation for ATE and power line disturbance
simulation testing. Three separate arbitrary
waveform generators enable the SmartWave to
create independent, complex waveforms on all
three phases simultaneously. The SmartWave
is designed to meet waveform requirements
including DC content (up to 312V), low distortion
(THD 0.25% to 100 Hz), low noise and ripple,
plus full compliance testing to many EMC and
avionics standards.
At only 8-3/4 inches high for the SW 5250A,
the SmartWave delivers the most power in the
smallest package. The SW Series is expandable
from 1.75 kVA to 22.2 kVA. Unlike other AC
power sources, the SmartWave delivers full rated
power to 45ºC..
Features and Benefits
Powerful Waveshape and Waveform Creation The
SmartWave can easily create fractional or multicycle
dropouts, spikes, surges, sags and distorted
waveforms from the front panel. To simulate
these complex real-world power occurrences, the
SmartWave comes with a library of 50 built-in
waveshapes (see examples on page 74). Users
can create and store an additional 50 waveshapes
of their own design. Output voltages are created
by adding amplitude, frequency and other
parameters to the waveshapes. The user can
also create over 50 custom front panel setups
with all parameters included and store them for
quick recall, making the SmartWave ideal for
manual testing.
Sequence Programming
Complex sequence or event programming is easy
with time or cycle based transient segments. The
sequence library is made up of a total of 1000
segments. A sequence of up to 100 segments
using up to 32 different waveshapes, arranged
in any combination, can be run at any one time.
The 32 waveshapes can be selected from the 50
factory supplied and 50 user created waveshapes.
By setting the time or number of cycles for
each segment, the user can create waveform
sequences that allow automatic testing for most
any standard.
Elgar SmartWave Series 1750–22200 VA
• Arbitrary waveforms
• Compliance testing for Airbus, DO-160
and Boeing standards
• 2Hz to 6kHz standard output frequencies
• Crest factors up to 4
• Parallel up to 22.2KVA
High Performance AC/DC Power Source 156–312 V
6.5–192 A
208 230 400
SEGMENT SEGMENT SEGMENT
10 mSec
SEQUENCE
5 Cycles 10 mSec
True simulation of time coincident events on a 3
phase power line using 3 internal ARB Generators
Sequences can be constructed with segments defined by
time or number of cycles.
230
203
204 www.ProgrammablePower.com
SW Series
AC and/or DC
A direct coupled, transformerless design allows
AC and DC on separate phases or on the same
phase. The SmartWave can be used as a true DC
power supply. High DC content waveforms (up
to 312 volts) can be created with no derating of
output power, even with 100% reactive loads,
eliminating the need for a separate DC supply.
Waveform Programming Software (Optional)
Waveform programming is easily accomplished
using the optional DSP PC software. The software
allows freehand creation of waveforms, using a
mouse or mathematical expressions. Waveforms
can be uploaded and modified from a digital
scope. The waveforms can then be downloaded
to the SmartWave via GPIB and output to exactly
simulate real-world conditions.
Flexibility in Power Ranges
The SmartWave series includes the SW 1750/1850
(single phase only), SW 3500/3700 (single or dual
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料30(108)
