(3)
Connect the tube (30) to the tube (15). Do not torque the coupling nut at this time.
(4)
Put the clamp (10) on the tube (15). Install the bolt (5), washer
(20) and nut (25) that attach the clamp to the engine bracket at the flange STA199 (A2). Do not torque the nuts at this time.
(5)
Put the clamp (10) on the tube (15). Install the bolt (5), washer
(20) and nut (25) that attach the clamp to the engine bracket at the flange STA185 (B5). Do not torque the nuts at this time.
(6)
Connect the tube (15) to the tee fitting on the upper case drain tube. Do not torque the coupling nut at this time.
(7)
Make sure that the tubes (15) and (30) are correctly aligned with each other, the HCU and the tee fitting on the upper case drain tube.
(8)
TORQUE the coupling nut on the tube (15) to between 135 and 145 lbf.in (1.52 and 1.63 m.daN).
NOTE : Use a second wrench to hold the tee fitting when you torque
____
the tube coupling nut.
(9) TORQUE the coupling nuts on the two ends of the tube (30) to between 85 and 100 lbf.in (0.96 and 1.13 m.daN).
NOTE : Use a second wrench to hold the tube (15) and the fitting on
____ the HCU when you torque the tube coupling nut.
(10) TORQUE the nut (25) to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
5. Close-up
________ Subtask 29-13-49-860-083
A. Aircraft Maintenance Configuration
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
Subtask 29-13-49-410-069
B. Close Access
(1) Close the fan-cowl doors:
-447AL, 448AR (Ref. TASK 71-13-00-410-040).
(2)
Close the door 195BB. Subtask 29-13-49-942-066
C.
Safety Precautions
(1)
Remove the warning notice(s). Subtask 29-13-49-865-065
D.
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 3700GD
HYDRAULIC TUBES - ENGINE 2 - INSPECTION/CHECK
_____________________________________________
TASK 29-13-49-210-001
Visual Inspection of the Hydraulic Hoses and Tubes
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
WARNING : DO NOT TOUCH THE HYDRAULIC SYSTEM COMPONENTS FOR A SHORT TIME AFTER
_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS STAY HOT FOR SOME TIME AND CAN CAUSE INJURY.
CAUTION : DO NOT LET HYDRAULIC FLUID FALL ON THE ENGINE. UNWANTED HYDRAULIC
_______ FLUID MUST BE REMOVED IMMEDIATELY WITH A CLEAN LINT FREE CLOTH. THE FLUID CAN CAUSE DAMAGE TO THE SURFACE PROTECTION AND TO SOME PARTS.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 1 m (3 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-13-49-000-001 Removal of the Hydraulic Suction Hose/Tube Assembly 29-13-49-000-002 Removal of the Hydraulic Pressure Hose/Tube Assembly R 29-13-49-000-003 Removal of the Top Case Drain Hose/Tube Assembly
29-13-49-000-004 Removal of the Lower Case Drain Hose/Tube Assembly R 29-13-49-000-005 Removal of the Hydraulic Low-Pressure Switch Tube R 29-13-49-000-006 Removal of the Pressure Relief Valve Hose/Tube
29-13-49-400-001 Installation of the Hydraulic Suction Hose/Tube
Assembly
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R 29-13-49-400-002 29-13-49-400-003 29-13-49-400-004 29-13-49-400-005 29-13-49-400-006 29-13-49-991-300 FOR FIN 1000EM2 71-13-00-010-040 71-13-00-410-040 Installation of the Hydraulic Pressure Hose/Tube Assembly Installation of the Top Case Drain Hose/Tube AssemblyInstallation of the Lower Case Drain Hose/Tube Assembly Installation of the Hydraulic Low-Pressure Switch Tube Installation of the Pressure Relief Valve Hose/Tube Fig. 601Opening of the Fan Cowl DoorsClosing of the Fan Cowl Doors
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM HYDRAULIC POWER 液压4(85)
